Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 605
  
|
| P1934 Vehicle Speed signal |
|
In regards to this trouble code 
is smth to worry about by reading the below actions.....???? 
P1943 possible cause:
* Vehicle speed invalid signal received over CAN
action: Check for ABS and TCM DTCs and rectify as necessary. Refer to the relevant workshop section.
Refer to the Network Communication section in the workshop manual.
|
 14th Feb 2014 3:28 pm |
|
|
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 1498
 
|
Possibly a wheel hub sensor 
Could result in malfunction of traction control and/or DSC
Easy to change, remove wheel, follow wire to rear of hub, release small bolt, twist/wiggle sensor whilst gently pulling out of hole in hub, unplug other end, replace, job done Never get mad - get even !!
06 D3 now gone to family member and still going strong at 265k
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
|
| 14th Feb 2014 3:47 pm |
|
|
Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 605
|
oh....
part no??? to check price 
|
| 14th Feb 2014 4:46 pm |
|
|
