peterm
Member Since: 28 Sep 2009
Location: sweden
Posts: 114
|
Back in early June I replaced the left front height sensor after getting faults logged on it. All has then been well until today when I got a cascade of new suspension faults. Happened twice on a 100km drive. Red suspention light, bongs and suspension on bump stops. Back home I read these codes :
U0132 : Lost comms with height module
C1A03 : Front left height sensor (the one I recently replaced...)
C1A04 : Front right height sensor
C1A06 : Rear right height sensor
C1A07 : Cross articulation error
I also checked when the codes were stored, and the C1A07 error is logged 2 km's before all the others.
Where to start trouble shooting ? I didnt do a height re-calibration after replacing the front left sensor in June, as the car was level with the new one in. Could that cause these issues ? I have an IID tool and could try the re-calibration as a start.
This is an LHD car, MY2008. Does that rule out some of the "usual" culprits like corroded transfer case ECU pins and the chaffed cables behind the front left wheel arch ?
/Peter Gone and missed : D3 TDV6 SE MY2008
|
18th Aug 2013 4:43 pm |
|
|