Member Since: 30 May 2013
Location: West Midlands
Posts: 275
Adding cornering lights to xenon headlights
Right Guys
Is it possible to fit the cornering lamps into xenon lights, there is the diameter marked in the reflector part of the light. I was wondering if you can drill this out ???????Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
25th Jan 2018 9:08 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8247
Yes! No need to drill it just pushes out It can when others can't,
It will when others won't,
It goes where others don't.
25th Jan 2018 9:50 pm
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
Ooooh wow
Great Thanks Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
25th Jan 2018 9:59 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
I think someone on here did that. You’ll need to make up wires to add to the plug and a CCF edit with something like an IID tool
25th Jan 2018 10:00 pm
thommo1927
Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 416
Keep us informed on how you get on with it
25th Jan 2018 10:52 pm
plocker
Member Since: 14 Mar 2016
Location: Preston
Posts: 828
Also interested in this. 05 V8 HSE Bonatti Grey
26th Jan 2018 4:09 pm
DiscoJeffster
Member Since: 27 Feb 2016
Location: Perth
Posts: 204
I couldn’t work out where to get the male pins for the light plug for a factory look, else I’d have done this mod
27th Jan 2018 9:25 am
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
Now just got work out how you remove these pins from a doner light to add to mine
Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
27th Jan 2018 5:46 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8247
Did this about 3 years ago, can't remember the details, still working good.
ISTR I got the pins from Mapplins, they came with short wires ready connected, I will have hunt and see if I have any left
[img:533:400]http://www.disco3.co.uk/gallery/albums/userpics/22146/normal_image_fafc6c46.jpg[/im]It can when others can't,
It will when others won't,
It goes where others don't.
27th Jan 2018 6:03 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
I’ve cornering lights on my xenons and I think they are one of the best mods I did. Out of quriosity I just looked into my old halogen headlights. The reflector is scored to brake out the hole for the bulb but the bulb holder is missing. I’m sure if someone wanted to they could glue a bulb holder to the back to match the pics above.
28th Jan 2018 7:53 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8247
I think you will find its a plug exactly like the photos above It can when others can't,
It will when others won't,
It goes where others don't.
On the D3, can you get the plug out of the light after you've unclipped it? I was looking on my D4 with Xenons and if I push the plug in to allow me to fit the lights, the plastic will be rattling around.
Any ideas?1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
28th Jan 2018 10:09 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8247
The plug is literally a dummy bulb, I got mine out in one piece but I can't remember how, I'm certain I didn't have to split the lamp It can when others can't,
It will when others won't,
It goes where others don't.
I had a look and it seems to push in from the front, inside the light and there's no room to pull it out once it's loose. I know the D3 lights can be separated by heating them for de-tangoing, but not the D4s.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
29th Jan 2018 7:47 am
Ruper
Member Since: 28 Jun 2019
Location: Virginia
Posts: 318
De-Tango plus cornering mods
D3 or LR3 2005 SE, no cornering lights, non adaptive halogen main beams. I want to add cornering lights, and am de tangoing the HL as well as adding in the Angel Eye DRL's possibly.
Also believe someone sells a blackout kit with strips to cover the silver rectangle under the main beams, a side strip, and a top strip for inside the headlight, makes it more like a modern D4 I guess. I could always paint that in if delivery is late. &t=327s this is the video on the headlight mod I found.
So would I need a socket for the cornering light add on? or just the wiring into the pin plug of the headlight?
IS there a kit with what is needed out there yet? As I know this is an old thread.
I have the CCF covered as I have the IID tool. Would I need to flash the ECU cause right now the IID tool says not fitted if I remember correctly.
Has someone done a write up on this? I looked but none found.
If a socket is needed where can I find one?2005 Land Rover D3, 4.4L V8, Maya Gold Metallic
1966 Scout 800, 196 cu.in.
1975 Scout II, 392 cu.in.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
