bbyer
Member Since: 25 Dec 2008
Location: Edmonton Alberta
Posts: 702
  
|
| You also need a pulley holder. |
|
Bodsy wrote:sopjas wrote:AS above, you only have to remove the fan cover and fan, spanner only costs around £6 from draper
You got a link by any chance....? 
I do not know about the diesels, but for the petrol V8 you also have to hold the pulley to remove the fan with the 36mm open end wrench.
I use a KD Tools #3900 pulley holder. The problem is there is a 3 hole triangular layout; most other vehicles have 4 holes in a rectangular pattern. You only have to grab two of the holes but the triangular layout is naturally Land Rovers way of adding challenge to what would otherwise be not too difficult a task.
http://www.amazon.com/KD-Tools-KDT3900-Uni...B001PIGIES 2005 LR3 HSE 4.4L AJ-V8 petrol; Traxide Dual Battery; PIAA 2500K Yellow Ion H11 Fog Light bulbs; CounterAct LT-2 Capacitive Corrosion control; LLumar AIR80 Blue clear Infra Red blocking side window film; Liftgate manual release; Schrader Valve "air in" mod to OEM air suspension reservoir tank; Akebono ceramic pads; OEM solid vented discs; LR4 design hitch receiver; Wiggs D4 MOST bluetooth module; Clock on the Dash; 3 Flash signal light mod; Backup Camera; 2015/16 Nav Data update.
|
 14th Jan 2012 9:43 pm |
|
|
