Thanks chaps - I wasn't getting anything when I connected it up. I'm guessing the OBD cable I had (from VW's VAG COM) is probably different to the generic OBD cables, so will order one off ebay and give it another try.
14th Jan 2013 1:23 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
Flack wrote:
..........................also when you get it to run at full power tweak the c02 setting for a about 45 secs just to burn off the crap..
Flack
Hi Flack.
What are the correct values ​​for Co2 please ???Marco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
..........................also when you get it to run at full power tweak the c02 setting for a about 45 secs just to burn off the crap..
Flack
Hi Flack.
What are the correct values ​​for Co2 please ???
Not sure marco, but you can only tweak it so far on the slider and once you shut it down it goes back to the default settings anyway.. It sounds like its going to take off if you run it at max c02 so I would not run it for long at this setting.
Flack
14th Jan 2013 5:29 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
Flack wrote:
Not sure marco, but you can only tweak it so far on the slider and once you shut it down it goes back to the default settings anyway..
Sure ? Last time , I set cO2"too low " and he never restart...
Flack wrote:
It sounds like its going to take off if you run it at max c02 so I would not run it for long at this setting.
Flack
Ok , now my setting : 9A, and yes , fan combustion seems to be a "little" noisy... Marco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
Member Since: 10 Mar 2010
Location: Wantage
Posts: 559
IanNP wrote:
e. The Disco3 is a perfect fit!
If anyone requires any further info then PM me.
How is the BLUE arrowed connector released?
18th Jan 2013 8:34 pm
kav1187
Member Since: 30 Sep 2012
Location: SX
Posts: 149
NOT like this
Click image to enlarge
If you're trying to reset it then just take the fuse out. I've broken the plastic around the pins on the fbh itself. FML
18th Jan 2013 9:57 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
Andyred90 wrote:
IanNP wrote:
e. The Disco3 is a perfect fit!
If anyone requires any further info then PM me.
How is the BLUE arrowed connector released?
FHB power from batteries......
You can read "wiki" for fhb (and other..) here : http://disco3.co.uk/wiki/Fuel_Burning_HeaterMarco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
For C02 adjustments you need an analyser, its a long boring job to get it right.
A kane 501 does the job.
If you have the manual its quoting the ideal range is suited to 8-13%.
The software only gives you an indication not the real value.
If if you adjust it on the software it takes along time to settle down.
GlenIDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
Have just read all 24 pages of this thread and just ordered the OBDII and a 2x2 lead along with the wire from the shop to make up the lead and hopefully resolve my FBH issues.
I have just been to the Webasto site for the software i notice there are several versions. Is it best just to get the most recent version or is the a preferred version
Cheers Rob
(visiting from RRSport.co.uk)
20th Jan 2013 3:44 pm
tomthumb
Member Since: 04 Dec 2012
Location: W.Mids
Posts: 199
Fbh not working, but still up to temp in 3ml 5-10june
Fbh is deff not working, but with outside temp @ 0 this week i'm still getting normal operating temp with in 5-10 mins 3mls,
Question: is this normal on a 2005hse, without the fbh
Or is an unknown fault generating the rise to normal temp so quickly,
I've only had this car a short while, so still getting use to all things land rover...RRSport MY12hse but don't hold that against lill o me
Hybrid TV, cubby Fridge, Surround Camera's, Sun Roof.
Disco 3 MY05hse Sadly gone
All alone in my own little world,
But everybody knows me there, so I'm ok.
21st Jan 2013 12:19 am
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
How do you know it's deff not working????
Sounds like it's working to me. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
21st Jan 2013 10:41 am
tomthumb
Member Since: 04 Dec 2012
Location: W.Mids
Posts: 199
Deffo not working, no heat from any fbh pipes at all, try'd on tickover with all dors & bonnet closed, even after a 1/4 mile run to the shops, checked there & when I got back, pipes & exhaust stone cold.
Deffo not working...RRSport MY12hse but don't hold that against lill o me
Hybrid TV, cubby Fridge, Surround Camera's, Sun Roof.
Disco 3 MY05hse Sadly gone
All alone in my own little world,
But everybody knows me there, so I'm ok.
21st Jan 2013 10:51 am
rolynoworse
Member Since: 20 Aug 2010
Location: West Sussex
Posts: 34
If anyone is interested I found this supplier of the Webasto 8-pin plug on Fleabay which I have ordered:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
