I've just finished putting my front end back together after removing the bumper, and mine is exactly the same as yours, so don't worry. The connector should be taped up really to stop it swinging and damaging the rad. I've no idea what the connector is for though - anyone know?Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
12th Apr 2008 11:52 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72901
No, the PDC (and front fog) connector is under the headlamp on the right hand side of the vehicle. I can't think what else could be fitted at the front, as the spot lamp wiring is not fitted as standard either.Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
that connector has been discussed before but I'm damned if I can remember (or search correctly for) what it wasSteve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
12th Apr 2008 1:41 pm
AN
Member Since: 26 Jul 2005
Location: Hungary
Posts: 327
Correct it was discussed before . 10forcash pointed out that this is a part of the automatic HVAC, it should be connected to a sensor which check the air quality and automaticaly shuts off the incoming air flow, if the quality is bad. This is a market specific option.LR D3 S Black, Auto TDV6
12th Apr 2008 2:14 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
Japanese market perhaps?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum