D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 440
  
|
Should I be able to remove the interior A pillar trim ( I'm thinking airbag problems ) ?
I'm wanting to hard wire a dash cam, and would like to hide cable, or should I just push up behind ?
Thanks
|
 27th Apr 2020 1:10 pm |
|
|
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
|
Pop the airbag logo off, screw underneath. Whole trim then pulls off. No airbag issues. Mind you, a (so called) professional installer thought it would be clever to wrap a cable around the curtain airbag
|
| 27th Apr 2020 2:01 pm |
|
|
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15269
  
|
In past installations I've just pushed the cable behind the trim, either at windscreen or door seal sides and never had any issues.
Tip, wrapping parts of the cable with a small bits of foam at various intervals will stop the cable popping out, also stops potential wire rattle. ...... always on the road less travelled 🚧
< ‘tis but a mere scratch …….. it’ll polish out.
Last edited by ronp on 27th Apr 2020 2:37 pm. Edited 1 time in total
|
| 27th Apr 2020 2:36 pm |
|
|
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 440
|
Thanks for that - a great help 
|
| 27th Apr 2020 2:36 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10730
 
|
Torx bolt behind airbag logo
|
| 27th Apr 2020 5:16 pm |
|
|
