Member Since: 22 Mar 2020
Location: norwich
Posts: 236
oil pump
i am changing the front timing belt water pump and oil pump and have come to a problem . the oil pump seems to be stuck to the block . i have removed 10 8mm bolts around the edge and 4 long 8mm bolts underneath and it just wont move . what an i doing wrong ?
26th Apr 2020 11:31 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10730
It is snugg.
There are dowels in the old ones.
Try getting to it at the top
26th Apr 2020 11:47 am
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 236
no dowels in this one just a tight fit . i managed to get a philips screwdriver into the allen key plug at the top then gently pry it off. thanks for your help
Use the old tensioner bolt and tighten it with a ratchet till the casing pops off, then using a hyde/soft mallet tap the centre till its sounds hollow, it will jump off then.
Flack
26th Apr 2020 3:53 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 236
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum