Member Since: 01 Jun 2011
Location: Fife
Posts: 569
EPB Faults
I've done a search but can't find exactly what I need.
The Red P is flashing on the dashboard, the screen tells me parking brake is off, lift switch to activate.
When I do activate it screeches.
The GAP IID tool gives me the following faults:
Parking Brake
C1A41-02 (A8 Clutch pedal sensor circuit - General failure information - general signal failure
C1A00-4B (A8 Control module - System internal failure - over temperature
I've disabled the auto function on it for the time being but does the above just mean the usual strip, clean and new pads while I'm at it or are those fault codes saying something else?
And which pads should I buy?
TIA
4th Apr 2020 12:40 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10732
its uses brake shoes. I doubt they are warn though
4th Apr 2020 1:37 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5061
C1A41-02 will be the switch in the clutch master cylinder. You can monitor its operation in "live values" to see if its working properly. Try clearing the codes and see what comes back, hopefully its not going to be much worse than that!!yµ (idµ - eAµ) ψ=mψ
4th Apr 2020 1:55 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20853
Position sensor will likely be a wiring issue at NSR corner
Member Since: 01 Jun 2011
Location: Fife
Posts: 569
Oh, that's not good.
That is the road to madness!
Hopefully, I can fix the EPB myself and the belts won't break on me. Has it ever happened that belts have snapped?
4th Apr 2020 4:38 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5061
Its rare for them to snap, I did an 08MY a few weeks ago with 210k miles on the clock and still on the original factory belts and oil pump yµ (idµ - eAµ) ψ=mψ
4th Apr 2020 5:17 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20853
I've seen one broken belt at 166k, but likewise, seen another at 210k on its original belt My D3 Build Thread
Member Since: 10 Apr 2017
Location: Hampshire
Posts: 409
DM & Prof,
Many thanks for the response, most informative. Personally I'd be anal and do whichever came first but I'm currently disco-less after SWMBO wrote mine off and looking for another. My old D3 was MY06 and I'm looking to replace like with like so it should be coming up on it's 2nd belt change as I'll be looking at a vehicle with less than 130K miles on it. A lot of adverts state "Cam belts done" so the question to ask is when and at what mileage was it done. Oh, and was the oil pump replaced. Best regards,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
doing nothing all day
