Member Since: 26 Jun 2017
Location: Northants
Posts: 10
Discovery 4 steering wheel fit on 3 ?
Hi all new to the discovery scene having just bought an 05 discovery 3. Great car apart from the steeringwheel leather has gone bad. I've been offered a disco4steeringwheel will it fit the 3. The 4wheel is covered in buttons and my 3 hasn't any I'm not bothered about them working just the wheel and airbag fitting on.
Cheers
26th Jun 2017 4:50 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
Yes it will if you want the buttons to work you can get a bit of kit from bbs Discovery 3 se gone
Range rover sport supercharged here:)
About £500 for everything, a heated wheel including heated clock spring from EBay and conversation boards from BBS. Boards are about £200 inc postage and extra for flappy paddle conversion kit The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
26th Jun 2017 8:59 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Russ, if your current wheel has no switches you will be able to control the radio volume, channels and select between CD player if fitted, from your new wheel. This should work as plug and play.
You will also have the ability to switch cruise control on/off but this will require enabling in the cars CCF so it knows it has cruise, with a suitable diagnostic tool, some forum members offer this service for very little cash. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
27th Jun 2017 6:09 am
Russ66
Member Since: 26 Jun 2017
Location: Northants
Posts: 10
Thanks I will let you know how it goes
27th Jun 2017 6:23 pm
Russ66
Member Since: 26 Jun 2017
Location: Northants
Posts: 10
Forgot to say but will the disco3 airbag fit on the 4wheel. Haven't seen the 4wheel yet the measure the size ?
27th Jun 2017 7:11 pm
Timothy1
Member Since: 06 Dec 2016
Location: Tanzania
Posts: 42
Hi Russ66
So how did it finally go?
Did you at least get the horn to work!?
Airbag from disco3 and 4 they the same!?
Thinking of doing the same
CheersEuro Parts Arusha
Tanzania
27th Dec 2018 5:25 am
A.J.M
Member Since: 31 Oct 2009
Location: Carluke
Posts: 2847
Air bag is the same.
My D3 airbag is in place on my D4 wheel I got fitted a few weeks ago.
27th Dec 2018 2:00 pm
haggy00
Member Since: 25 Feb 2019
Location: Scotland
Posts: 6
Hello I've fitted the d4 steeringwheel to my d3 but can get it to work even with ccf edit any ideas
25th Jul 2019 11:14 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14111
Hi
Have u fitted the modified circuit boards to ur D4 steeringwheel, is it heated or not
What isn’t working please , thks
25th Jul 2019 11:16 pm
haggy00
Member Since: 25 Feb 2019
Location: Scotland
Posts: 6
I've fitted this conversion but my cruise control is not working i think its be cause my car shudders at 50 mph torque converter problem of the fact it comes up with a bug F on my dash
25th Jul 2019 11:21 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14111
Thks
What setting have u set ur cruise control on in the ccf diagnostics , did u have it fitted on ur D3 wheel please
Have u checked / changed ur ATF gearbox oil yet or added Dr Tranny in it , also checked ur props for any wear
Also check ur TCM module that sits behind the battery , sometimes water ingress or bad pins
More importantly what fault codes come up on ur diagnostic reader
Cheers
25th Jul 2019 11:25 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
haggy00 wrote:
I've fitted this conversion but my cruise control is not working i think its be cause my car shudders at 50 mph torque converter problem of the fact it comes up with a bug F on my dash
You need to have cruise enabled in the cars config. You cannot fit the switch and expect it to work.
It will however work IF you had cruise previously working on your old steeringwheel.
You have swapped out the circuit boards for the BBS boards haven't you?
Or have you just fitted a D4 steeringwheel and nothing else?Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
25th Jul 2019 11:37 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14111
Hi
If I remember correctly I set the CCF for the cruise to “ ladder 1 “
Last edited by gstuart on 25th Jul 2019 11:47 pm. Edited 1 time in total
25th Jul 2019 11:45 pm
haggy00
Member Since: 25 Feb 2019
Location: Scotland
Posts: 6
Currently fitted it and but not the bbs thank I need help with range rover wire if you can help to get seat working in a d3 also
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum