SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
  
|
Hi,
I am trying to test my FBH to check it is working using the Nanocom.
I can Prime the unit but it fails the test. I get a simple message "Test Failed: Reason:1!"
Anyone know what this means, and what I should do next?
|
 16th Nov 2014 5:09 pm |
|
|
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
|
Do you have the engine running when you try to test run it?
Pete. IID, webasto software and workshop facility's available.
|
| 16th Nov 2014 6:25 pm |
|
|
Barn1e
D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
|
My Nanocom also failed to test the FBH. I know it is working because it started on a cold morning last week. I keep meaning to post on the Nanocom Forum.
Edit - tried it with and without engine running 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
|
| 16th Nov 2014 7:00 pm |
|
|
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
|
The engine needs to be running for it to work, ive had to try it a few times on some vehicles to get it to work with a nanocom.
Pete. IID, webasto software and workshop facility's available.
|
| 16th Nov 2014 7:03 pm |
|
|
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
|
Ok, thanks for the replies.
I will try again tomorrow with the engine running, not cold enough down here yet but will like to be ready!
|
| 16th Nov 2014 9:30 pm |
|
|
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1389
|
I'm the same. I know mine is working - I've had it running with the Webasto software and it started up the other morning when it was 4C. But it fails the Nanocom test (though I haven't tried with engine running). 2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
|
| 17th Nov 2014 12:16 am |
|
|
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
|
Now tried with engine running with same result, will post on the nanocom board.
|
| 17th Nov 2014 4:32 pm |
|
|
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
|
I'm new to the Evo so how do you set the test for the FBH?
|
| 17th Nov 2014 4:39 pm |
|
|
trev 1
Member Since: 09 Sep 2014
Location: Seaton, Hull
Posts: 212
  
|
Same here not seen anything to do with fbh on Nanocom, where is it need to test mine did not start the other day and it was cold enough, also no faults with it on Nanocom, which lead do I need to buy to use the Webasto software and laptop
|
| 17th Nov 2014 6:55 pm |
|
|
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 432
 
|
It's in the latest vs under utilities.
I have the same issue with my EVO, so will be looking with interest.
|
| 17th Nov 2014 8:03 pm |
|
|
R77NGO
Member Since: 11 Apr 2012
Location: Uttoxeter
Posts: 39
|
Me too 
|
| 17th Nov 2014 10:21 pm |
|
|
Barn1e
D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
|
I have update my post on the Nanocom forum here http://nanocom.blackbox-solutions.com/inde...rking#5067 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
|
| 17th Nov 2014 10:35 pm |
|
|
R77NGO
Member Since: 11 Apr 2012
Location: Uttoxeter
Posts: 39
|
Posted on nanocom forum
Interested to know the outcome?
|
| 17th Nov 2014 10:47 pm |
|
|
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
|
I shall try and answer, but as I do not have the nanocom working in front of me so it is by memory.
After connecting the unit and selecting the bottom vehicle, it goes and reads your car and checks your VIN.
When the menu opens at the bottom it is possible to scroll to the next page, you will find the FBH option about 3 down.
Click into this and the next menu is Prime and Inputs, click on Prime and it allows you Prime and Test.
If I made any mistakes I hope one of the other users can explain better.
|
| 17th Nov 2014 11:14 pm |
|
|
|
|
