- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
  
|
I must need to upgrade my Evo as I don't have that menu.
Guess I'll have to contact Nanocom and work out how to get the latest version software.
This should be fun!
|
 19th Nov 2014 3:29 pm |
|
|
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 432
  
|
The latest vs is listed in your private area at the bottom of the screen (not the same area and log on as the forum). You then simply download it to your pc, then follow the information to unzip it and update your nanocom in the literature available on the site.
It takes around 10 minutes to update the NC (well mine does anyway), and you do not have to overwrite the old vs, because if you do - you will have to input your unlock code again as many have found post update, as the device will not be recognised on the car without the unlock code..
Many people are using the beta vs, but it does carry additional risks by the very nature so it is entirely your choice on that front.
|
| 19th Nov 2014 6:36 pm |
|
|
Barn1e
D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
|
Latest version of the beta version is now available and should fix the problem, 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
|
| 19th Nov 2014 10:36 pm |
|
|
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
|
Installed it last night and primed the FBH. We has 2 degrees C the other morning and nothing and got in the car at 6 degrees so wasn't expecting anything to happen. On the journey into work, stopped at a set of lights and the gauge was reading 4 degrees and lo and behold, a cloud of smoke came from the front of the car, guess it was clearing its lungs.
Many thanks chaps
|
| 20th Nov 2014 8:54 am |
|
|
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
|
I am in Germany at present and will not be able to try the new patch until next week, so will try when back home.
I assume we have to install a new version of the beta 1.26 software, is this right?
|
| 20th Nov 2014 2:37 pm |
|
|
tomthumb
Member Since: 04 Dec 2012
Location: W.Mids
Posts: 199
|
I can confirm that the nano prime & test is now working on the fbh.with the re released 1.26b beta
The prime sequence lasts about 45sec,
Clear down faults & cycle ignition,
with engine runing test fbh
then clouds of smoke
was enough smoke to fill the drivway & then some  RRSport MY12hse but don't hold that against lill o me
Hybrid TV, cubby Fridge, Surround Camera's, Sun Roof.
Disco 3 MY05hse Sadly gone
All alone in my own little world,
But everybody knows me there, so I'm ok.
|
| 20th Nov 2014 3:35 pm |
|
|
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 432
|
Well at least yours is - mine started to show the green status bar, then failed and locked up twice.
Will try and do it again at the weekend, but something is not right with my update / vehicle 
|
| 20th Nov 2014 6:59 pm |
|
|
Barn1e
D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
|
Please don't try it yet. I have had just about every light and fault code show up and cannot drive car. My thread on other forum is here http://nanocom.blackbox-solutions.com/inde...rt=15#5109
EDIT: After clearing the fault codes, it does seem like everything is good again. Phew. 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
|
| 20th Nov 2014 8:05 pm |
|
|
|
|
|
|
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
|
Hi Chris,
Is the new software back yet?
|
| 26th Nov 2014 6:13 pm |
|
|
trev 1
Member Since: 09 Sep 2014
Location: Seaton, Hull
Posts: 212
 
|
Come on bbs, need to test the FBH 
|
| 26th Nov 2014 6:39 pm |
|
|
|
|
trev 1
Member Since: 09 Sep 2014
Location: Seaton, Hull
Posts: 212
|
Chris when you at BBS do a upgrade etc would it be possible to give it another name or number ie
Systems Upgrade BBS_V1.26-B to Systems Upgrade BBS_V1.26-c so we or I know it has been sorted
|
| 26th Nov 2014 9:56 pm |
|
|
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
