Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
Trev and Wombat - did it work? I am being a little bit of a chicken 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
27th Nov 2014 1:08 pm
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
Seems to be some change, I have updated the Beta version but the Prime is failing, so not sure if the software is not working or whether the FBH is not Priming with fuel as no reason given.
It does fail very quickly, within seconds. I have tried with engine running and not running. Same result.
I have just tried the FBH routine and it all works now, prime and test routine action with no error's have you updated to latest release ..
Flack
27th Nov 2014 1:30 pm
trev 1
Member Since: 09 Sep 2014
Location: Seaton, Hull
Posts: 212
Yes tried it this morning, primed ok, tested tried to start heater loads of smoke ran for 10 seconds then stopped, said test it had worked ok, but when I check for logged faults the ( FBH failed to start when tested) so we will have to see.
27th Nov 2014 2:10 pm
SouthernWombat
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
Good, seems the beta is fixed, must be fuel problem with mine. Would be nice to have a failure code to help identify cause.
27th Nov 2014 2:40 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
Hi Wombat,
Before you run it, clear all the faults. Then run the prime with ignition stage II and engine off. Run test with engine on.
Member Since: 30 Aug 2014
Location: Devon
Posts: 224
Bingo! Did as suggested Chris and both tests worked, although the second test ran for a long time - close to thinking it may have frozen after the white smoke had cleared and it still was in test mode.
Good result - thx Chris.
27th Nov 2014 4:46 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Worked a treat, ran it as karpouzih says, prime first with ign. on then test with engine running
The only little problem now is that the Nanocom is unresponsive while the test is running, so it's not possible to check the live values while the FBH is running Clive
27th Nov 2014 5:05 pm
trev 1
Member Since: 09 Sep 2014
Location: Seaton, Hull
Posts: 212
Yes I thought that too.
27th Nov 2014 5:09 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
The nanocom is Actually waiting for feedback during the test so unfortunately we can't do that... Just yet we will have a fiddle.
I also need to say a big thanks to Pete and Mick for the testing over the fast few days.
You really need to post on the Nanocom website, as the software is still classed as Beta there will be bugs in it, You will get a faster response from there..
Flack
1st Dec 2014 9:02 am
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
OK, will do that Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
1st Dec 2014 9:03 am
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Edited to remove as it was posted in wrong thread!Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
Last edited by Sloss on 2nd Dec 2014 8:18 am. Edited 1 time in total
1st Dec 2014 7:29 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Oops! Wrong thread.....Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
we will have a fiddle.
