Member Since: 31 Oct 2014
Location: yorkshire
Posts: 5
B0096 Right Side Restraint Sensor 1.
Click image to enlarge
HI, Im in a bit of a dilemma. Can anyone advise me on fixing the above fault my local garage who do my repairs have just eliminated 3 faults by replacing the passenger seat pressure sensor. But the other fault (which was already there before replacing the passenger pressure sensor) iv got is the right side restraint sensor iv spoke to LR and they have advised me to check the drivers side seat belt pre tensioner. Iv had look under the seat and can't see any loose or broken wires but I don't fancy 150.00 to find out its not that.
Thanks in a advance any help appreciated
3rd Nov 2014 6:22 pm
d1sco3
Member Since: 31 Oct 2014
Location: yorkshire
Posts: 5
Would anyone happen to know if this is the same fault as a side impact sensor? LR want £114.00+vat+labour just to tell me what the fault is. I'm halfway there but don't want the expense of buying 30,000 air bag sensors iv read on a pdf file it is the same but it says it's in the passenger door I just find it strange as that's the left side and the fault iv got is right side.
Thanks
5th Nov 2014 12:10 am
skilachi
Member Since: 18 Dec 2015
Location: London
Posts: 4
Hi, did you manage to sort this out in the end? I've got the same error code on my range rover sport with the airbag light coming on.
19th Jan 2016 5:30 pm
skilachi
Member Since: 18 Dec 2015
Location: London
Posts: 4
Anyone knows the fix for this error code on a RRS too?
19th Jan 2016 5:31 pm
gmmcdonald
Member Since: 05 Oct 2010
Location: George
Posts: 19
I had this problem. It turned out to be the wire leading to the pretensioner had chafed and was shorting against the seat rail. I insulated it and problem solved.Gareth
28th Jan 2016 7:41 am
skilachi
Member Since: 18 Dec 2015
Location: London
Posts: 4
Hi, thanks very the reply. Are you able to take a pic of the location of the pretensioner or where I'm suppose to be looking for?
I bought one of this electrical contact cleaner from Halfords.
Thanks
28th Jan 2016 9:29 am
MrDevereux
Member Since: 13 Jul 2022
Location: Edinburgh
Posts: 9
Hi
Does anyone have a diagram of where the restraints are? I'm looking for Sensor 1. I've taken a look at the wiring from what I can see without removing the seat and it looks O.K. Do I need to remove the seat to take a better look at the wiring / the faulty sensor?
I have the B0096 fault as shown on my Icarsoft V2.0
Any help would be most appreciated
13th Jul 2022 11:23 am
MrDevereux
Member Since: 13 Jul 2022
Location: Edinburgh
Posts: 9
Tried to take a better look at the cables and trace them all the way to the module under the seat, cables seem good and don't seem damaged. I can't see under the seat as I'd have to disconnect a lot of cables to be able to flip the seat upside down, I'd prefer to just try replace the sensor first to see if that will remedy the fault
Does anyone know where restraint sensor 1 is? Is it inside the actual seat belt pre-tensioner assembly? Do I just replace the whole pre-tensioner assembly? I can see there is a Torx bolt holding the assembly and the outer plastic trim.
Any help would be much appreciated
Many thanks
Last edited by MrDevereux on 20th Jul 2022 7:40 pm. Edited 1 time in total
20th Jul 2022 7:25 pm
MrDevereux
Member Since: 13 Jul 2022
Location: Edinburgh
Posts: 9
Just to check right side is the offside driver side right as in a RH drive car yeah? Lol was just thinking right could be passanger side if looking at the car from the front 🤦🤣
20th Jul 2022 7:34 pm
MrDevereux
Member Since: 13 Jul 2022
Location: Edinburgh
Posts: 9
Just found this diagram online, I might have been looking in the wrong place, it might look like that sensor 1 is a door side impact sensor. Anyone know where I can find that?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum