| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
spb
Member Since: 07 May 2010
Location: Cumbria
Posts: 201
  
|
Where did you get the camera ?
Sounds like you have the one that goes with the surround system, rather than the standard reverse cam. TD4 Freelader ES
TD5 Defender 90 Tombraider LE
TD4 Freelander Kalahari
Another TD5 Defender 90 Tombraider LE
TDV6 Discovery 3 SE
TDV6 Discovery 4 XS
TDV8 L405 Range Rover vogue SE
|
 26th Aug 2014 8:43 pm |
|
|
spb
Member Since: 07 May 2010
Location: Cumbria
Posts: 201
|
you need this one
camera LR043493 TD4 Freelader ES
TD5 Defender 90 Tombraider LE
TD4 Freelander Kalahari
Another TD5 Defender 90 Tombraider LE
TDV6 Discovery 3 SE
TDV6 Discovery 4 XS
TDV8 L405 Range Rover vogue SE
|
| 26th Aug 2014 8:45 pm |
|
|
munders
Member Since: 23 Jul 2014
Location: marlborough
Posts: 55
|
I found it on the dreaded e-bay sight.
Will look into finding the correct camera!!!!!
cheers
If you know of any!!! please let me know, someone might want my wrong one.
Thanks again
|
| 26th Aug 2014 9:26 pm |
|
|
munders
Member Since: 23 Jul 2014
Location: marlborough
Posts: 55
|
I have eventually found and fitted correctly the rear reverse camera and wiring loom, yippy just need know to sort out the wiring to front screen with coax cable!!!!
Anyone 100% sure what needed just to finish off my long awaited conversion!!!!
Can't wait to finally see when reversing onto trailer.
please help 
|
| 2nd Oct 2014 7:24 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
The blue connector is from the surround camera system .. It won't fit in the stand alone analog reverse camera
Edit .. Ignore that .. Didn't see there was a second page to the thred G4 Gone ...but not forgotten
|
| 2nd Oct 2014 7:28 pm |
|
|
munders
Member Since: 23 Jul 2014
Location: marlborough
Posts: 55
|
I have changed the cable from a blue connector to the original brown connector, all I need to do is find the correct coax cable to run along head lining to screen which is the hardest task to make up a wire to plug into the rear of unit.
Also need to make a plug which connects into the rear to power up camera, so need to spline into the reverse lights and an earth wire.
Anyone know for sure how the best way to carry out this final part of completion to finish my add on reverse camera.
I have used all genuine LR parts. cheers
|
| 4th Oct 2014 5:37 pm |
|
|
|
|
munders
Member Since: 23 Jul 2014
Location: marlborough
Posts: 55
|
Does anyone know for sure what coax cable needed and where best to buy it from!!!!!
Only need this part to finish it off.
I have looked on e-bay but wanted to make sure I get the right end connections!! if you know what I mean.
Cheers all
|
| 6th Oct 2014 7:27 pm |
|
|
|
|
munders
Member Since: 23 Jul 2014
Location: marlborough
Posts: 55
|
Hi, Just wanted to make sure and confirm, I have been reading through and noticed there are 2 different Fakra cable options with male or female ends and when listed they show for sale on e-bay but sadly most sellers are from china or poland!!!!
Is it just me can't us brits make anything any more!!!!!
Surely there's some one in the uk whom sells the right RG174 fakra cable.
Please can anyone help and advise which connector needed and the best place to buy from, also the length surely 3 metre's is enough!!! to run from rear headlining to screen.
Be very grateful for assistants. 
|
| 9th Oct 2014 5:39 pm |
|
|
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
|
If yours is a 2010 it will need the 2 pin (computer like) connector for the sat nav end. I think it was later 2012 on, that have the Fakra at the nav end.
The Disco3 shop will sell you a small jump lead but you can also make one with a length of coax and some smb ends.
Edit- length wise I am not sure. Use a bit of string and either do healining to front passenger A pillar down thru glove box to behind nav. 3m should do it but maybe 3.5m to be safe.
Last edited by stenh02 on 10th Oct 2014 9:13 pm. Edited 1 time in total
|
| 9th Oct 2014 7:47 pm |
|
|
munders
Member Since: 23 Jul 2014
Location: marlborough
Posts: 55
|
Hi, thanks for the reply
Just trying to dot the I's and cross the T's to make sure I have all parts to finish the job off.
Thanks again will defiantly let you know how I get on. Cheers
|
| 10th Oct 2014 8:23 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
