Cut and chisel the spinning head off, this is a hard material so ensure you gave good kit, then underneath you'll see the actual nut, drive a slightly undersized socket on it or use a stud extractor nut if you have a set, once removed replace it and the other 3 with standard nuts Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
8th Jul 2014 7:49 pm
sean 471
Member Since: 26 Apr 2011
Location: Sheffield
Posts: 2990
As beanie says but others will be the same they are pants. I got some new ones 18 months ago and the same happened.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
8th Jul 2014 8:04 pm
will247
Member Since: 05 Jan 2013
Location: York
Posts: 709
I've used the set below on two locking wheel nuts that have done this, cracked the cap off with a flat chisel (both times I could see a crack in the cap)
I have the full set of 10, can't remember which size I use.26 and on the 4th LR..
Series 2a 1963 88'' 2.25 Derv as original with Galv chassis
Disco 1 1996 V8 on LPG (sold now)
Disco 3 2005 TDV6 S (sold now)
Disco 4 MY15 XS Commercial
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
