Paulejlprl
Member Since: 22 Apr 2014
Location: Shropshire
Posts: 3
|
Hi all, I am new to the site and wondered if any one can help with a problem with my disco 3, this is a long story but will try to keep to the facts, thinking I would try and save some ££ I changed the front lower rear swing arm bushes+ o/s/f cv boot + n/s/f wheel bearing/hub assy biggish job for me but got it done, then the trouble started, when started driving the traction control coming in, hdc fault system unavailable,suspension lowering, after having tracking done had the column sensor calibrated all seemed ok, when going away for the weekend after 2 hrs on the motorway got orange light on, suspension fault on LCD, and normal hight only, had it on a snap on scanner today and has come up with these, u0421 invalid data received from ride level control module, c1131 air supply, c1a20 pressure increases too slow when filling reservoir, any ideas?? Is this to do with the first prob or so thing new!!! Thanks all sorry for the essay p.s the compressor fires up for around 15 seconds then cuts out and the disco is now down on the stops coz had the bung out of the air tank!!.
|
22nd Apr 2014 9:27 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6267
|
sounds like you need a new compressor or see if you can repair it. Do a search on the board for changing the silca gel in the dryer on the pump or the casing cracked.
Flack
|
23rd Apr 2014 8:30 am |
|
|
Paulejlprl
Member Since: 22 Apr 2014
Location: Shropshire
Posts: 3
|
Thanks for the reply, I was thinking compressor to be honest, but am just hoping not!! It has gone in for a diag today so am bracing for the bad news!!!! Will post the results, I see on eBay a recon kit, for around £100, does that sound about right? Paul.
|
25th Apr 2014 8:06 am |
|
|
Paulejlprl
Member Since: 22 Apr 2014
Location: Shropshire
Posts: 3
|
Got it sorted today, had a disco 4 pump fitted, pipe work altered and the upgrade on the computer, £840 lighter
|
30th Apr 2014 9:16 pm |
|
|