Forum · Gallery · Wiki · Shop · Sponsors


Home > Member Galleries > nikademus > AUX battery

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
SANY0091.jpg
Aux Battery Installed1032 viewsIts a tight fit, but uses the LR battery mounts and bracket, slightly modified.
SANY0097.jpg
12v Isolator876 viewsEnsures that aux ery won\'t charge until the main batt is topped up and won\'t drain the main batt. I used the biggest I could find to take the load with no stress - especially the higher voltage on the landy. Came as a compete kit and works well.
SANY0107.jpg
2 new rear 12v outlets933 viewsI added these two after market 12v oulets that are directly wired via a 30amp fuse to the aux battery. Why 2? Well you can never have enuff in my experieince... There\'s also a 12v socket wired to the ignition on the other side.
SANY0110.jpg
12v outlet wires859 viewsonside the drivers side rear hatch, whos the wires joined up for the rear sockets.
SANY0115.jpg
Main Feed799 viewsHere\'s the shielded positive feed from the main battery. Runs accross the fireall with lockties to support.
SANY0120.jpg
Optima Battery781 viewsBattery makers sheet for all you rivet counters out there.
SANY0121.jpg
Installed and wired863 viewsShows the wiring loom to the isolator, the feeds (fused link) to the rear outlets and the other feeds are for the battery meter
SANY0122.jpg
The worksite714 viewsIt looked a simple job, but it was very fiddly and was completed over several weekends
8 files on 1 page(s)