Forum · Gallery · Wiki · Shop · Sponsors


Home > Member Galleries > nikademus

Robe, South Australia

0 files

Tom Tom go 910, aux input, 12volt in rear
DVC00147.JPG

6 files, last one added on 17 Sep 2006

AUX battery
SANY0110.jpg

8 files, last one added on 02 Jan 2007

Disco 4

0 files

 
 
 
 
4 albums on 1 page(s)

Last additions - nikademus's Gallery
SANY0110.jpg
12v outlet wires859 viewsonside the drivers side rear hatch, whos the wires joined up for the rear sockets.02 Jan 2007
SANY0115.jpg
Main Feed799 viewsHere\'s the shielded positive feed from the main battery. Runs accross the fireall with lockties to support.02 Jan 2007
SANY0121.jpg
Installed and wired863 viewsShows the wiring loom to the isolator, the feeds (fused link) to the rear outlets and the other feeds are for the battery meter02 Jan 2007
SANY0122.jpg
The worksite714 viewsIt looked a simple job, but it was very fiddly and was completed over several weekends02 Jan 2007
SANY0091.jpg
Aux Battery Installed1032 viewsIts a tight fit, but uses the LR battery mounts and bracket, slightly modified.02 Jan 2007
SANY0120.jpg
Optima Battery781 viewsBattery makers sheet for all you rivet counters out there.02 Jan 2007
SANY0097.jpg
12v Isolator875 viewsEnsures that aux ery won\'t charge until the main batt is topped up and won\'t drain the main batt. I used the biggest I could find to take the load with no stress - especially the higher voltage on the landy. Came as a compete kit and works well.02 Jan 2007
SANY0107.jpg
2 new rear 12v outlets933 viewsI added these two after market 12v oulets that are directly wired via a 30amp fuse to the aux battery. Why 2? Well you can never have enuff in my experieince... There\'s also a 12v socket wired to the ignition on the other side.02 Jan 2007