dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
 13th Feb 2013 11:21 am |
|
|
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
|
Placed my order with Nick (TLO) 
He said one of the things (micro switch I think) is on back order at the moment but hopefully not too long a delay until it gets sent.
I also purchased the jump cable for the back of the sat nav from the Disco3 shop. It looks kinda short but hopefully will do the job.
Grant
|
| 21st Feb 2013 11:29 am |
|
|
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
| 21st Feb 2013 11:35 am |
|
|
alano
Member Since: 22 Sep 2012
Location: Woking
Posts: 15
  
|
Have also ordered my parts and as soon as they arrive will start documenting and posting the process.
|
| 27th Feb 2013 6:04 pm |
|
|
Rob55
Member Since: 12 Feb 2013
Location: N.Ireland
Posts: 92
 
|
Is it possible to get this working as it would come from the factory with tow assist enabled?
|
| 27th Feb 2013 7:32 pm |
|
|
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
|
Rob55
I think Tow Assist is a function of the surround camera setup - this topic refers to the OEM reversing camera only(analogue).
With the full surround camera setup you need 2 additional cameras for the front bumper, 2 wing mirrors with the cameras integrated, a different digital rear camera, a separate ECU to control the cameras & all the interconnect cabling.
I am trying to research retro-fitting this at the moment, but it looks as though it is going to be very expensive.
If you have access to all the hardware, and a faultmate, then yes it should be possible.
Hope this helps
Rgds
Andrew
|
| 27th Feb 2013 9:13 pm |
|
|
Rob55
Member Since: 12 Feb 2013
Location: N.Ireland
Posts: 92
|
Ah I see, I misunderstood and thought tow assist was a standard feature of the reverse camera
|
| 27th Feb 2013 9:15 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
It is possible to retro fit the surround camera system ... But as said its very very expensive
And yes ... Tow assist is only available on the surround camera system G4 Gone ...but not forgotten
|
| 27th Feb 2013 10:10 pm |
|
|
Rob55
Member Since: 12 Feb 2013
Location: N.Ireland
Posts: 92
|
Another rookie question, if I may  I assume when the trailer electrics are connected, the rear PDC shuts off?
|
| 28th Feb 2013 8:23 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Only when the tow electrics have been enabled G4 Gone ...but not forgotten
|
| 28th Feb 2013 9:13 am |
|
|
Triumph_Dave
Member Since: 28 Feb 2013
Location: Somerset
Posts: 49
|
Hi All, I am a newbie to this forum, but not to LR as I ran several RR's in the 80's. I now have a MY12 August build D4 XS and would also like to get the rear view camera going. From this discussion I understand I would need the following :
1 camera
1 tailgate microswitch with camera wiring
1 tailgate loom again with camera wiring
1 custom rg74 coax pigtail with male smb connectors on each end.
My questions are as follows:
1. I believe most of the above can be supplied by TLO, who are they ??
2. Where can I optain the coaxial cable with the fakra connections to link up the screen?.
3. Does anyone know anyone or a company in Somerset ( Taunton ) that would have a fault mate
or similar to activate the camera?. I assume the local LR dealer would not do this?.
Any help or ideas on above appreciated..
Dave
|
| 2nd Mar 2013 4:14 pm |
|
|
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
| 2nd Mar 2013 8:24 pm |
|
|
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6903
|
there will also be a member on here not too far away, is Bodsay anywhere, near, I'm sure he does it? Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
|
| 3rd Mar 2013 7:15 am |
|
|
Triumph_Dave
Member Since: 28 Feb 2013
Location: Somerset
Posts: 49
|
dangerdave wrote:Dave,
1. The Large One is Nick, the Parts Manager at Land Rover Yeovil.
2. Have a look at this sites shop for the FAKRA cable. They have some for sale.
3. Enabellment can be done by Faultmate OR Autologic machine. Do a google search on either and your locality and it should reveal a few garages that have the facilities. Failing that phone up your independent LR garage and ask! And no, an official LR dealership can't do it.
Hi DD, thanks for that info... I am now onto it...
One question.. on this message thread different posters state that the later screens could use the 6 pin connector or coax ( depending on their view ref shift stick or rotary selector) ... My D4 build is Aug 12 and it has a rotary selector...does this 100% mean its a Fakra connector?. Is there a way to identify if the screen uses the 6 pin or the coax/fakra connection from the VIN number??. If its 6 pin, is this a LR supplied part and how do you wire it??.
I am just trying to make sure I have all the correct parts when I open it up to fit it...
All suggestions appreciated..
Dave
|
| 3rd Mar 2013 1:12 pm |
|
|
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
|
wiggs wrote:Gearstick = 6 pin connector
Pop up rotary gear = fakra
As above from Wiggs earlier in this topic.
I bought the Fakra cable from the Disco3 shop but it has a phono plug on one end, but I think we need a Fakra to Fakra.
So I bought a male to male or plug to plug SMB (like fakra but not got locking clips) cable off the 'Bay as Andrew (AJSMS99 who has done this on a 2012 rotary gear knob model disco 4) said that this is what is required.
You can have a look for the FAKRA cable end when you pop the lower central console off as it looks like this is easier than getting to the Nav screen just for a look-see (there are posts earlier on in this topic with links to dismantling).
Like you, I was wanting to get everything ready before the dismantling began and I think TLO sent my parts Friday so should be here this week!
G
|
| 3rd Mar 2013 4:27 pm |
|
|
