Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D4)

D4 XS wiring for rear camera
Post Reply  Down to end
Page 18 of 22 <123 ... 171819 202122>
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 942

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

This is a bit of a 1 man thread now but hopefully I will get a response...

I have run a new cable from my camera to my screen with at best a marginal improvement in picture quality but its still unusable which suggests the problem lies with the camera itself. It was a numberplate light replacement one which I cut down to fit in the actual camera hole so possibly I have caused the problem. Any recommendations for a reverse camera? Is the LR genuine one worth the extra money? Are there any which other aftermarket ones which fit in the existing camera hole? Should I just buy another numberplate light one and not cut it down? Main purpose of the camera is for reversing onto trailers so I would like to be able to see the tow ball if possible, even if this means a bit of adjusting at the installation angle.

Thanks for any input given
  
Post #17572943rd Jan 2017 4:31 pm
View user's profile Send private message View poster's gallery Reply with quote
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 942

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

Update from ages ago - fitted a new cheapie eBay camera and it works brilliant. So the issue was my expensive camera all along. Either it was just crap or I damaged it when I cut it down to size.
  
Post #17996814th Apr 2017 10:42 am
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13024

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

details for "cheapie eBay camera ?"
 .


Dean
====================================

2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer Sad ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms 
 
Post #17996824th Apr 2017 10:49 am
View user's profile Send private message View poster's gallery Reply with quote
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 942

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

The exact one isn't available from the seller I used but something along these lines: http://www.ebay.co.uk/sch/sis.html?_nkw=Mi...749.l2658. basically a 360 CCD HD camera. It doesn't look too far back but does get the towball. Don't have a photo of the image at the mo but can get one if you want
  
Post #17996864th Apr 2017 11:05 am
View user's profile Send private message View poster's gallery Reply with quote
Sly666
 


Member Since: 14 Dec 2014
Location: East Sussex
Posts: 459

United Kingdom 2013 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

I have a 2013 XS and would like to add a camera, but being a tight Censored i dont want to pay ££££ on genuine LR camera, looms, cables etc.

What is the best after market (ebay Rolling Eyes ) camera to buy which will show the tow bar too?
I work in electronics so can make up my own cables. Does anyone know which connectors i need to complete?

Cheers!
 
 
 
Post #18234716th Jun 2017 7:53 pm
View user's profile Send private message View poster's gallery Reply with quote
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 942

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

I believe you need a fakra connection to go in to the back of the screen for a 2013 car. Don't know about "best" but see my link above. That's what I used and its grand though needs a bit of creative installation under the boot handle to get the towbar included in the view. Not sure if the number plate light replacement ones will include a view of the towbar.
  
Post #18235707th Jun 2017 7:51 am
View user's profile Send private message View poster's gallery Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

As I understand it if you have the popup dial for gear change then you have a Fakra connection on your head unit and on the end of the cable under the lower centre console. If not then the connector is a pinned type and quite different. If you have Fakra, use a 'Z' type (unkeyed) that's the easiest way. This will get you from head unit to cable under console.

http://www.ebay.co.uk/itm/Fakra-female-jac...SwLVZVoIJ6

There is another Fakra male (IIRC) in the head lining at the tailgate, passenger side. Same idea would apply. I just bought the factory looms just because it was easier as it also provides power to the camera from the tailgate switch.

This thread helped me greatly and there is more info in this one too: https://www.aulro.com/afvb/l319-discovery-...all-3.html

David
  
Post #182820819th Jun 2017 7:12 am
View user's profile Send private message View poster's gallery Reply with quote
Sly666
 


Member Since: 14 Dec 2014
Location: East Sussex
Posts: 459

United Kingdom 2013 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

Job done.
I have the pop up gear shifter.

I bought the following. ..

Front fakra cable.
www.ebay.co.uk/itm/120993869660

Rear fakra cable.
www.ebay.co.uk/itm/161568961076
I chopper off the antenna connector then soldered and heatshrunk it to my camera output cable.

Camera. Although I would not recommend this one as it requires some serious modification.
www.ebay.co.uk/itm/231558568622

Then edited the car CCF with my iid tool to enable. An easy mornings work.
 
 


Last edited by Sly666 on 11th Aug 2017 1:14 pm. Edited 1 time in total 
Post #182834319th Jun 2017 12:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Gilly1
 


Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359

England 2015 Discovery 4 3.0 SDV6 SE Tech Auto Fuji WhiteDiscovery 4

ajsms999 wrote:
Hi Guys,

Just want to correct something I posted earlier Embarassed

The fakra connector at the back of the screen is the PURPLE coloured one - which is 4th from the right NOT 3rd as I previously posted.
Connector C2820 in the drawing.

Must find out how to post some pics Embarassed

They are in my gallery - if you want to look.

Sorry for any confusion - hope this is clear Thumbs Up

Regards
Andrew
[/img]


Hi, can I just confirm that this is the correct location for rear camera & can anyone tell me what the brown 1 is for as mine is available (empty)
 2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do, 
 
Post #184614110th Aug 2017 10:19 pm
View user's profile Send private message View poster's gallery Reply with quote
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 942

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

Yes that's the one. No idea what brown is for im afraid.
  
Post #184617911th Aug 2017 7:27 am
View user's profile Send private message View poster's gallery Reply with quote
Gilly1
 


Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359

England 2015 Discovery 4 3.0 SDV6 SE Tech Auto Fuji WhiteDiscovery 4

Thankyou kindly swansty.. Thumbs Up
 2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do, 
 
Post #184618011th Aug 2017 7:29 am
View user's profile Send private message View poster's gallery Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

Gilly1 wrote:
ajsms999 wrote:
Hi Guys,

Just want to correct something I posted earlier Embarassed

The fakra connector at the back of the screen is the PURPLE coloured one - which is 4th from the right NOT 3rd as I previously posted.
Connector C2820 in the drawing.

Must find out how to post some pics Embarassed

They are in my gallery - if you want to look.

Sorry for any confusion - hope this is clear Thumbs Up

Regards
Andrew
[/img]


Hi, can I just confirm that this is the correct location for rear camera & can anyone tell me what the brown 1 is for as mine is available (empty)


Brown one is for connection to tv tuner.

David
  
Post #184842118th Aug 2017 4:34 am
View user's profile Send private message View poster's gallery Reply with quote
Storming
 


Member Since: 02 Jun 2015
Location: Black Isle
Posts: 95

Scotland 2013 Discovery 4 3.0 SDV6 Commercial XS Auto Stornoway GreyDiscovery 4

Guys
Quick question
I have been used to surround cameras and tow assist. Can I retro fit a camera to a 16 plate D4. That will give me the curvy lines and chsnge to look at tow hitch as I get close ?

Thanks

Storming
  
Post #193627413th Apr 2018 8:23 pm
View user's profile Send private message View poster's gallery Reply with quote
andywillis89
 


Member Since: 15 Oct 2018
Location: Harrogate
Posts: 3

England 2012 Discovery 4 3.0 SDV6 XS Auto Zambezi SilverDiscovery 4

Hi all, can someone bring me up to speed with who/what ‘TLO’ is for the parts required that are listed early on in this post?

Thanks

Andy
  
Post #20248432nd Feb 2019 5:54 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Andy, this thread is for a D4, your profile says D3.
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #20248492nd Feb 2019 6:04 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 18 of 22 <123 ... 171819 202122>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site