Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > In Car Electronics (D3)

bluetooth intermittenly connecting?
Post Reply  Down to end
Page 1 of 1
hal8
 


Member Since: 19 Aug 2012
Location: perth
Posts: 2

bluetooth intermittenly connecting?

Hi everyone, I've got a blackberry 9300 and it only seems to connect with the D3 once in a while. Whenever I get into the vehicle it trys to connect but fails then randomly it sometimes connects. Any ideas? I've tried changing all the settings on the phone to see if that makes a difference but to no avail.

Any ideas would be greatfully received!!
  
Post #9851703rd Oct 2012 8:32 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

What year is your car ?
 G4 Gone ...but not forgotten  
Post #9851803rd Oct 2012 8:44 pm
View user's profile Send private message View poster's gallery Reply with quote
hal8
 


Member Since: 19 Aug 2012
Location: perth
Posts: 2


hi, its an 59 plate. I've just tried a Blackberry Bold and that didnt work either but an Iphone 4 does seem to work.
  
Post #9852223rd Oct 2012 9:42 pm
View user's profile Send private message View poster's gallery Reply with quote
mjom89
 


Member Since: 13 Sep 2011
Location: Essex
Posts: 586

England 2016 Discovery 4 3.0 SDV6 Commercial Auto Loire BlueDiscovery 4

I used to have a bold, and found that upgrading the Bluetooth module to the one from the D4 was the best solution.

Wiggs has created a good guide if how to do it, and I got my module from TLO.

I have since upgrade the blackberry to an iPhone (it will happen to everyone eventually!) and that too works well with the D4 module.

There are a lot of advantages to the D4 one, and I'm sure someone will list them soon, but I think phone book with mobile and home phone listings is one of them, as well as sound quality.
  
Post #9852293rd Oct 2012 9:49 pm
View user's profile Send private message View poster's gallery Reply with quote
CUCO
 


Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609

Spain 2010 Discovery 4 3.0 TDV6 HSE Auto Nara BronzeDiscovery 4

How many contacts could the d4 module handle??

( I have in excess of 1200....so i need a large contact book....and i dont know if is me that dont find the name i need in some occasions....or is the module that is well over its capacity)
  
Post #9852413rd Oct 2012 10:08 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

1000 contacts
 G4 Gone ...but not forgotten  
Post #9852433rd Oct 2012 10:12 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

hal8 wrote:
hi, its an 59 plate. I've just tried a Blackberry Bold and that didnt work either but an Iphone 4 does seem to work.


Unfortunatly it's a blackberry software thing . Bit hit and miss with the LR software .

Upgrading to a D4 would be your best bet
 G4 Gone ...but not forgotten  
Post #9852453rd Oct 2012 10:14 pm
View user's profile Send private message View poster's gallery Reply with quote
CUCO
 


Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609

Spain 2010 Discovery 4 3.0 TDV6 HSE Auto Nara BronzeDiscovery 4

Thank you wiggs. Now its clear. Thumbs Up
  
Post #9852463rd Oct 2012 10:14 pm
View user's profile Send private message View poster's gallery Reply with quote
CUCO
 


Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609

Spain 2010 Discovery 4 3.0 TDV6 HSE Auto Nara BronzeDiscovery 4

Just to inform you and to let all know:


I have the hand free of the car, LR original module and a small belkin bluetooth receiver that is plugged to the aux input. One phone calls and the other audio (music) streaming.

As i have a lot of parrots spread installed in many different cars parked one near other, sometimes my phone links to the wrong one and i have to re-link it to the correct one by hand.

As every single bluetooth piece have its single id number but as the parrot model is the same (so is the name it stores when pairing), its fine to rename the correct one in the list of linked devices in the bluetooth menu in the phone to know to which you must link at every occasion.

BUT,

In the D4, i have two bluetooth devices, that could live together and work in paralell at the same time so well, phone change over pretty well to one or the other as needed, but because i have the parking multipairing problem i had renamed the D4 name to LAND ROVER_TELEPHONE and the audio receiver to LAND ROVER_HIFI AUDIO to easy pick up in the screen.

Wrong!! It causes a mess, bluetooth in the car suddenly closes, reconect, closes, no contacts shown, and the audio cuts the sound every 20 secs...

I update the D4 module: no joy.

So i revert the name i wrote into short names: LR PHONE and LR AUDIO.

Eureka!! All functions properly!!! I love electronics and its magic!!!
Maybe testing if changing the name get things better to you until a D4 module is provided (or exchanged to you by wiggs).

For me this trick works perfect.
  
Post #9852563rd Oct 2012 10:30 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site