Who in South Africa had their TDV6 "de-cat"? If anyone has done it, where can I have it done?
Thanks2007 TDV6 SE auto (ex Write off)
2013 D4 SDV6 SE auto
17th Jan 2012 6:03 am
KOOS BEST
Member Since: 14 Feb 2010
Location: Mtunzini
Posts: 122
Hi Jacques, I had mine done last month at a exhaust place. They cut the cat box out just below the turbo, and welded in a pipe , ie. no other box. I have resonance or extra noise.
Did take pics will try and post it later
Any performance issues? Is your D3 still standard or mapped? Steves recon that the car will probably need to be remapped
Baben, what is you take on all of this2007 TDV6 SE auto (ex Write off)
2013 D4 SDV6 SE auto
18th Jan 2012 7:03 am
Nico G4-2
Member Since: 11 Nov 2008
Location: Pretoria
Posts: 128
menlyn motorcity Dunlop
Hi J
You know when a buss card was on your table for 3minths and when you need it is is not there
O well - mine was done at the Dunlop branded - Autotyre ? - @ menlyn motor city - the one up LOIS avenue.
The 'owner/manager' who's card did the trick was very nice and said they have done a few already - as in removed the small domestic animal from a D3 - They have exhaust workshop above the tyre set-up. I also do all my vehicles tyres with them for a while now and get very good service from al there.
Then British did the EGR blanking as well - I do not notice any diff - but I drive with a light foot and used the Chrystler over the holidays
NicoNico
'91 BYB - Big Yellow Bus: Ex-CT Tdi Disco
'05 BOV - Big Orange Van: TDV6 D3 G4 - Hit a COW the animal kind
'11 BBB - Big Black Bus: D4 HSE 5.0 V8 - busy with MODS
'16 KIA SEDONA - 11 SEATS
SWAMBO ... Small black number - RCZ
Thanks Nico, good to know, I will go there on Saturday.
BTW how much?2007 TDV6 SE auto (ex Write off)
2013 D4 SDV6 SE auto
18th Jan 2012 9:30 am
Nico G4-2
Member Since: 11 Nov 2008
Location: Pretoria
Posts: 128
Sorry - Did few things can't remember ? but was not shocked at th time if it helps Nico
'91 BYB - Big Yellow Bus: Ex-CT Tdi Disco
'05 BOV - Big Orange Van: TDV6 D3 G4 - Hit a COW the animal kind
'11 BBB - Big Black Bus: D4 HSE 5.0 V8 - busy with MODS
'16 KIA SEDONA - 11 SEATS
SWAMBO ... Small black number - RCZ
18th Jan 2012 12:34 pm
D4JWW
Member Since: 20 Oct 2009
Location: London, UK
Posts: 1319
DiscoJacques wrote:
Thanks Koos. Any exhaust place?
Steves Auto Clinic quoted R1,000????
Any performance issues? Is your D3 still standard or mapped? Steves recon that the car will probably need to be remapped
Baben, what is you take on all of this
Hi how are you? Hunger for more power never stop but removing cat could save the turbo!!!(see hgbosch's post on forum below)No need to remap according to Pete from BAS, Speak to Peter at Landworx TGWinduna : http://www.4x4community.net/forum/showthread.php?t=103988, we still need to learn the things he has for gotten about D3's
Cost of replacement pipe remember R300 being mentioned according to hgbosch on the same forumA few mods... and keeping it all running...Faultmate MSV2
MY09EGR's blanked Thanks Bellautos, BAS
18th Jan 2012 1:11 pm
KOOS BEST
Member Since: 14 Feb 2010
Location: Mtunzini
Posts: 122
DiscoJacques wrote:
Thanks Koos. Any exhaust place?
Steves Auto Clinic quoted R1,000????
Any performance issues? Is your D3 still standard or mapped? Steves recon that the car will probably need to be remapped
Baben, what is you take on all of this
I got it done for R 800.00 .
As mentioned they bend a pipe and welded in.
I have no noise or resonance at all, done over 2000km , and no issues,
I also blanked the EGR's. I will say she feel a bit more responsive.
The position of the cat
[/img]
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
18th Jan 2012 5:50 pm
D4JWW
Member Since: 20 Oct 2009
Location: London, UK
Posts: 1319
Interesting Koos, any pics of replacement pipe?, the cutting and welding of new pipe was not done on the car A few mods... and keeping it all running...Faultmate MSV2
MY09EGR's blanked Thanks Bellautos, BAS
18th Jan 2012 6:51 pm
KOOS BEST
Member Since: 14 Feb 2010
Location: Mtunzini
Posts: 122
No sorry , neglected to take a pic of the new pipe.
All the work was done in situ, the pipe was measured , bend , until a nice fit than it was welded on.
19th Jan 2012 6:00 am
D4JWW
Member Since: 20 Oct 2009
Location: London, UK
Posts: 1319
KOOS BEST wrote:
No sorry , neglected to take a pic of the new pipe.
All the work was done in situ, the pipe was measured , bend , until a nice fit than it was welded on.
Skilled welder to work in confined space near proshaft ? What to do with the CAT then any Valuble metals like petrol CAR?A few mods... and keeping it all running...Faultmate MSV2
MY09EGR's blanked Thanks Bellautos, BAS
19th Jan 2012 9:14 pm
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
I was introduced to Johnny Strassburg by George Bosch:
Johnny Strassburg
De Graaf Undercar
012 332 548five
799 Codonia Avenue
Waverly
Pertoria
he did my RRS TDV8, which has 2 cats in confined space. Nice neat job. he had to fit two extra silencers cos the noise was hectic. Made a big difference, one of them was looking a bit blocked
Car sounds actually better (no silencer was added in).
Only one negative and that is that the car smells like a tractor when idling. The cat does keep the smelly diesl fumes away.[/img]2007 TDV6 SE auto (ex Write off)
2013 D4 SDV6 SE auto
2nd May 2012 12:26 pm
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
