Member Since: 20 Dec 2011
Location: Durham
Posts: 3
1 of the (i think torx) bolts is very tight to get in to so i epoxyed a torx bit into a brake adjusting spanners square hole its the perfect size and did the trick a treat, also i seem to remember needing to bend an old flat head screw driver over by about 120' to coax something out of its housing but i cant remember what, all in all if you are good with spanners its about 30mins if your not sure its an hour but its all fairly pain free06 D3 TDV6 Light guards, side steps, privacy glass, EGR Blanking Kit(saving up for filter and remap next)
25th Dec 2011 12:40 am
uktivo
Member Since: 13 Oct 2011
Location: Staffs
Posts: 139
Just a quick update before I go to bed before santa arrives.
I ended up buying the 150 piece professional kit for 99 pounds. I also purchased a professional 1/2 inch rachet. A good quality telescopic magnet. And as a real treat, I got one of these to keep it all in.
Member Since: 13 Oct 2011
Location: Staffs
Posts: 139
tdv6paul wrote:
1 of the (i think torx) bolts is very tight to get in to so i epoxyed a torx bit into a brake adjusting spanners square hole its the perfect size and did the trick a treat, also i seem to remember needing to bend an old flat head screw driver over by about 120' to coax something out of its housing but i cant remember what, all in all if you are good with spanners its about 30mins if your not sure its an hour but its all fairly pain free
That will be at least an hour then.. lolSelling my wifes Audi A3 2.0LTR FSI DSG Sport to help pay for her D3
Pictures in my gallery
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum