bbyer
Member Since: 25 Dec 2008
Location: Edmonton Alberta
Posts: 702
  
|
| RHS tail gate cable support bolt loose also. |
|
When I was installing my version of the upper rear lift gate manual release into the lower rear tail gate, (pictures of the mod in my gallery), I discovered that the right side support cable bolt was loose as well. The bolt was still snug, but that was the best one could say.
I also had the problem of the loose upper strut right side bolt being loose, and thanks to the forum, I caught it while it was still attached.
The upper strut bolt took maybe two turns of the wrench to fully tighten; the lower tail gate support cable bolt, only a part turn. 2005 LR3 HSE 4.4L AJ-V8 petrol; Traxide Dual Battery; PIAA 2500K Yellow Ion H11 Fog Light bulbs; CounterAct LT-2 Capacitive Corrosion control; LLumar AIR80 Blue clear Infra Red blocking side window film; Liftgate manual release; Schrader Valve "air in" mod to OEM air suspension reservoir tank; Akebono ceramic pads; OEM solid vented discs; LR4 design hitch receiver; Wiggs D4 MOST bluetooth module; Clock on the Dash; 3 Flash signal light mod; Backup Camera; 2015/16 Nav Data update.
|
 1st Aug 2010 4:09 pm |
|
|
