- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Compusmentis
Member Since: 18 Feb 2016
Location: Effingham
Posts: 237
  
|
No UK spec D3's were fitted with dpf's.
Unless yours is an import, I would suggest you get a second opinion from a different garage.
 New gearbox & TC, 3 x front wheel bearings, belts changed, new oil pump, new battery, new rear prop, new front prop, new front diff, front arb refurbed, front cv boot kit, egr blank and BAS software patch, full rear suspension / drivelive rebuild, new front arms, LED trailer light fix, split charge.
Never had a 107, 90 or 127, but have had most of the rest!
|
 27th Jan 2018 7:53 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
If you want to drop me your VIN, I’ll confirm if you have DPF or not. I can blank/update your D3 also and have done many many many of these. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 27th Jan 2018 8:33 pm |
|
|
conman69
Member Since: 11 Aug 2012
Location: Norfolk
Posts: 431
|
I've recently been informed that a software patch to command the valves to stay closed is all thats required and blanking doesnt need to be carried out
Can anyone share any light on this? Discovery3 TDV6 GS
Disco3.co.uk front orange +white tailgate stickers
Belts, pulleys, oil pump replaced, double tow-bar electrics
Land Rover rubber mats throughout, tinted windows, wind deflectors, smoked side repeaters, retro fitted Garmin, smooth leather steering wheel, cruise control + radio switches, 19" HSE wheels, Bearmech side-tubes, BAS IFBH module, roofbars.
LML Star Deluxe
|
| 29th Jan 2018 5:12 pm |
|
|
Compusmentis
Member Since: 18 Feb 2016
Location: Effingham
Posts: 237
|
May well work if the valves will shut and shut tight. But the amount of crud in them, and the abrasive effect of very hot gasses rushing past them for the last 10 years will make that pretty unlikely in my opinion.
And then what about the butterfly on the throttle intake? That will still need dealing with. New gearbox & TC, 3 x front wheel bearings, belts changed, new oil pump, new battery, new rear prop, new front prop, new front diff, front arb refurbed, front cv boot kit, egr blank and BAS software patch, full rear suspension / drivelive rebuild, new front arms, LED trailer light fix, split charge.
Never had a 107, 90 or 127, but have had most of the rest!
|
| 29th Jan 2018 5:22 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Yup, the bodge way of doing it is to make sure you fix the faulty EGRs before writing them closed....
why bother spending the money to fix knackered EGRs and then paying again to bodge them out s beyond me.
Properly blanked and centre butterfly valve removed is the only method you should consider imho.... Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 29th Jan 2018 10:52 pm |
|
|
sumomeister
Member Since: 30 Sep 2017
Location: Cardiff
Posts: 5
|
Ian, I pm'ed you yesterday, did you see it?
|
| 29th Jan 2018 11:05 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Have now.
Will reply shortly. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 29th Jan 2018 11:40 pm |
|
|
conman69
Member Since: 11 Aug 2012
Location: Norfolk
Posts: 431
|
Compusmentis wrote:May well work if the valves will shut and shut tight. But the amount of crud in them, and the abrasive effect of very hot gasses rushing past them for the last 10 years will make that pretty unlikely in my opinion.
And then what about the butterfly on the throttle intake? That will still need dealing with.
You are definitely correct there and thanks for the reply
So in the correct order, it would be blank first then patch. Discovery3 TDV6 GS
Disco3.co.uk front orange +white tailgate stickers
Belts, pulleys, oil pump replaced, double tow-bar electrics
Land Rover rubber mats throughout, tinted windows, wind deflectors, smoked side repeaters, retro fitted Garmin, smooth leather steering wheel, cruise control + radio switches, 19" HSE wheels, Bearmech side-tubes, BAS IFBH module, roofbars.
LML Star Deluxe
|
| 30th Jan 2018 4:17 am |
|
|
Compusmentis
Member Since: 18 Feb 2016
Location: Effingham
Posts: 237
|
I blanked them in the morning, and applied the software patch in the afternoon.
Probably best to find a time when Pete from Bell Auto Services is online - I had to do a pump reset not mentioned in any write-ups, and his help and experience solved it in no time. New gearbox & TC, 3 x front wheel bearings, belts changed, new oil pump, new battery, new rear prop, new front prop, new front diff, front arb refurbed, front cv boot kit, egr blank and BAS software patch, full rear suspension / drivelive rebuild, new front arms, LED trailer light fix, split charge.
Never had a 107, 90 or 127, but have had most of the rest!
|
| 30th Jan 2018 5:50 pm |
|
|
sumomeister
Member Since: 30 Sep 2017
Location: Cardiff
Posts: 5
|
Big thanks to Bodsy, drove down to sunny South Wales on Thursday to blank off my EGRs and do the necessary with the remapping. Noticed the difference immediately, very happy. Too early to comment on any mpg gains, only time and the heaviness of my right boot will tell.
Thanks again Ian.
Cheers, Simon.
|
| 10th Feb 2018 11:04 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
No problem Simon, pleasure to meet you.
I think that right foot will be getting plenty of exercise!  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 10th Feb 2018 12:14 pm |
|
|
Darth
Member Since: 12 Apr 2014
Location: Suffolk
Posts: 47
|
Is there anyone out east Anglia way that will fix/blank off my egr valves and if so how much?
Thanks
|
| 11th Feb 2018 8:54 pm |
|
|
Karl85
Member Since: 13 Feb 2018
Location: Claydon
Posts: 4
|
Hi could some one advised me on my egr value. Do I need to remove old egr and blank them off or can I just plug this egr emulator?
|
| 13th Feb 2018 7:58 pm |
|
|
conman69
Member Since: 11 Aug 2012
Location: Norfolk
Posts: 431
|
Darth wrote:Is there anyone out east Anglia way that will fix/blank off my egr valves and if so how much?
Thanks
Plenty of places will do it at a price but will write on receipt that they are not responsible for failing MOTs etc.
Check out the guides on here and do it yourself
You also won’t need a software patch Discovery3 TDV6 GS
Disco3.co.uk front orange +white tailgate stickers
Belts, pulleys, oil pump replaced, double tow-bar electrics
Land Rover rubber mats throughout, tinted windows, wind deflectors, smoked side repeaters, retro fitted Garmin, smooth leather steering wheel, cruise control + radio switches, 19" HSE wheels, Bearmech side-tubes, BAS IFBH module, roofbars.
LML Star Deluxe
|
| 15th Feb 2018 2:35 pm |
|
|
Darth
Member Since: 12 Apr 2014
Location: Suffolk
Posts: 47
|
Thanks mate, I never seem to have time to do it ,yield so I'll have to ring round. Got to get the brakes sorted first though 😞
|
| 17th Feb 2018 10:31 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
