Member Since: 22 Jan 2010
Location: @ home
Posts: 75
Retrofit surround camera system to 3.0 HSE
Hello
my wife will be getting her discovery4 3.0 HSE next week, unfortunately she needed it asap so no factory order was possible.
The "missing" extras are TV, Camera System and Aux Heater.
What are my possibilities ? Is the wiring there and can the parts be odered ?
Has anyone had it chiptuned already and whats the gain ?
thanks,
Michael
Last edited by carcollector on 29th Jan 2010 6:22 pm. Edited 1 time in total
22nd Jan 2010 7:18 pm
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
The short answer is: no, those things cannot be retrofitted.
22nd Jan 2010 11:14 pm
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
that is unfortunate....
so then all those component connections are within the loom that is car specific ? or is it separate looms ?
also, what do the aux inputs for the hav unit look like ? chinch or multiplug ?
sorry to ask tonz of questions....
23rd Jan 2010 12:44 pm
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
To say it would be impossible would be too strong a term, but it would certainly not be cost effective and the car would have to largely taken to bits.
23rd Jan 2010 1:49 pm
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
i have the skills to take the car apart and put it back, i used to own a car shop.
if you can answer my questions then please do so, so far i didnt get any smarter
23rd Jan 2010 4:51 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72955
23rd Jan 2010 4:53 pm
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
The wiring is, largely, not there. What you want to do is, essentially, not an option.
Of course, you can buy all the parts, and the wiring. After all, they are only parts, and you car is made up from parts too.
If you want to pursue the idea, then I suggest you acquire a copy of Microcat, and start to make a list of the large number of bits you will need. I suspect the parts would be much more expensive in Switzerland too.
23rd Jan 2010 6:05 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
carcollector wrote:
if you can answer my questions then please do so, so far i didnt get any smarter
I can help you with the part numbers of the looms and components you need to convert all you want, but first id need to know what looms you already have fittted and the part numbers on them.
The problem is that to provide this information you would need to take the car apart just to invesitgate what you have or have not got.
Then and only then can we help you with the bits you are missing to complete your task, and thats if landrover have actually got the bits available which they seem not to have for the heater and TV.
Baring im mind even if you can get all the bits and do the labour your self, i recon it would cost more than actually buying the car with it already fitted at the factory.
EG , i fitted a heated wheel to a D4 , the parts were probabaly 500 quid, and as far as im aware you can buy the heated wheel as a option for 107 quid.
Pete
23rd Jan 2010 11:08 pm
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Hiya All
I would tend to agree with Winger on this one.
Not because i think NO is the absolute right answer though.
Sorry chap, allow me to explain
Once upon a time many D3 owning members used to ask if lower spec cars and in particular their ICE could be upgraded to higher spec, and the answer was always NO.
Hell even 4x4 info was once a NO too,
But now many members get their D3 4x4 enabled and i have shown that the ICE can be upgraded and have even provided the vehicular reprogramming capabilities to do so. a number of members have followed my lead to some degree or other.
As Pete has shown, we already have the capabilities to enable 4x4 and much more on lower spec D4's however upgrading its equipment is prohibitively expensive due to the costs and difficulties involved in getting the bits required.
For example there are many bits for the D3 on Ebay and so on which allowed me to upgrade my D3 for not a lot, but even the most basic of updates to a D4 means you need to buy your bits new from a dealer which may make it prohibitively expensive.
Even figuring out what you may have and need is most difficult as it stands.
I am sure this situation will change as time goes by, but for now its definitely more NO than YES
23rd Jan 2010 11:47 pm
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
wow.....im amazed by all the constructive input, a prime example of how a forum can work
let me answer individually if i may:
winger:
thanks, i was not aware the partscatalogue can be bought, where would i get that ? i am used to shopping
my car bits in the UK as switzerland is just horrid for that.....
bellautos:
thank you for the help offered, which i gladly accept i am ready to take the car apart if u can tell me what i am looking for.
you are saying heater and tv u cannot get the parts from LR? i remember a thread about heaters where it was mentioned it was an eberspächer unit ?? i might be of help talking to them in germany if so.....
what can be done once we have the bits installed to enable the, ? i bet the local dealer cannot do this ?
where can we start in this quest ?
BBS SPY:
thank you for your explanations. how should i say.....patience was never my strongpoint
i am ready to take the car apart if u can tell me what i am looking for.
you want to dismantle a brand new, 40k+ car.... for the sake of a couple of extras
Capable or not, there goes your warranty...The next American ex-pat that calls it a "truck" is going to find out what 2.7 tons feels like on their foot...
Club "yes, I too have had the EGR's replaced..."
Club "yes, I too have had the compressor replaced..."
Club "yes, I too once had the car at the dealer for a couple of weeksnearly 4 weeksover 4 weeks...5 weeks"
Club "yes, I too have had EPB failure..."
Club "yes, I too get mysterious bings and bongs..."
25th Jan 2010 6:46 pm
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
I am sceptical about the sincerity of the original question.......
25th Jan 2010 6:48 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72955
Not DG undercover again???
25th Jan 2010 6:56 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50971
I would be far more imaginative Del ...you know that 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
25th Jan 2010 7:02 pm
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
I am looking forward to Pete giving online dismantling and reassembly instructions.........will be a joy to behold.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum