bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black](../images/veh/santorini_black.gif)
|
be carefull to choose the correct plugs i know there are 2 different ones for the read camera depengding on which camera is fitted.
i have a rear camera here and also a rear loom but the connectors are different so i think ive got part of one and part of another camera set.
pete
|
29th Jan 2010 3:43 pm |
|
|
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
![](templates/vbnew/images/spacer.gif)
|
i take it the important part will be @ the unit where they are plugged in. once we get our
hands on wire / male & female plugs / tooling im sure we can cut off the existing plug and put on what we need.
the question really is what exact plug is needed to go into that magical "box" in the picture.
i am unsure at this point if the swiss spec HSE is delivered with a rear camera. all it says in the contract is parking aid.......we'll know tomorrow @ 10AM as this is when we are picking it up
i take it i dont have the box if i aint got a rear camera...so 1 more thing on the partslist....
anyhow it's kinda ok cause this way if we are successful we can fit the system to any D4 that didnt have any camera to start with
|
29th Jan 2010 3:52 pm |
|
|
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
![](templates/vbnew/images/spacer.gif)
|
oh....1 more important bit....
i was able to CONFIRM that D4s do have DIFFERENT LOOMS depending on what they came with. in my case
there IS NO WIRING FOR THE CAMERAS in my loom.
bellautos hinted to it, the large one confirmed it.
|
29th Jan 2010 3:59 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black](../images/veh/santorini_black.gif)
|
You dont have a rear camera fitted as std on your spec sheet you have a smokers pack tho lol
|
29th Jan 2010 4:18 pm |
|
|
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
![](templates/vbnew/images/spacer.gif)
|
then thats 2 times ......
once for the smokers pack.....i do smoke but wife wont let me in her car....
secondly to have to buy another "box"
|
29th Jan 2010 4:48 pm |
|
|
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
![](templates/vbnew/images/spacer.gif)
|
carcolletor PM me an e mail address and providing I get an evening at home and not called out to put another fire out I will try to take a couple of pictures of the connectors and box. MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
29th Jan 2010 5:00 pm |
|
|
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
![](templates/vbnew/images/spacer.gif)
|
have sorted most questions out now....with a little help from the large one i will get all the necessary
LR bits together, i keep u updated.
|
2nd Feb 2010 11:42 am |
|
|