Member Since: 26 Feb 2010
Location: Poznan
Posts: 5
I think the nearest faultmate is in the UK but of course i will try to contact BBS Spy
Wiggs could be disappointed spending an all inclusive weekend in Poznan- it is not as atractive as Cracow although a beer is delicious here and i would have the most expensive 4x4 info
If you think about TPMS the best way is to look for it in the USA. If you have a TPMS module together with blue and green connector plugs (located in the middle roof) you have 70% of the system- the rest is some wires and antennas (maybe the switch pack located above the radio will be also necessary).
Is Cruise control only a switch located at the steering wheel + wires to ECU or there is also a separate module? I bought in US almost complete LR3 HSE '05 with slight demage only for parts and i think cruise control is still available and i can look for it.
Member Since: 26 Feb 2010
Location: South Yorkshire
Posts: 42
Fitting OEM Sat Nav
Well, I have to say thankyou to the site members that I have come into contact with on my OEM fitting Sat nav journey. I have a found this thread and site very interesting.
Just to recap, I was keen to fit, or have fitted an OEM sat nav unit and it so happened that I purchased the screen and unit of flea bay and then looked deeper into fitting the system, thinking it was almost plug and play .
Well its not quite that, much more in fact, in fact its been a great experience from start to finish, yes I took the seats out along with the carpet part of the dash, looms etc etc and then replaced it all after power up as per Ian’s thread in worked spot on. It was funny, my wife was horrified to see the car part way through the fitting, [she fainted, that was her escapism, and this, thinking about it, was mine!] whilst our neighbours over the course of the weekend just though I was having a spring clean.
Once done, yes the basic Nav worked, needed all the other functions [phone, tmc, voice activation, 4x4] activated which they were today.
So I must thank Andy, Ian & Wiggs.
Looking forward to my next inspired project.
AndyMAndym Expert Beverage
21st Apr 2010 9:47 pm
IanNP
Member Since: 17 Aug 2009
Location: Lancashire, Chorley ..ish
Posts: 204
Thank You for the post - nice to see the hard work of doing the impossible is worth it!
The screen with all its' bits (4x4 info, voice etc) is well worth having. It finishes off the vehicle - more toys to play with. The Nav is far better than having something stuck the windscreen and the TMC works well too.
One of those things that if you don't have you don't miss/don't know what your missing, but once you have it you don't want to be without.
Andy is in the process of fitting the RSE (Rear Seat Entertainment) which I have penciled in but not had the time to do .... yet!
Ian..so what can I fiddle with today that ain't broken ...?
21st Apr 2010 10:45 pm
1andrewm
Member Since: 26 Feb 2010
Location: South Yorkshire
Posts: 42
I feel my next inspired project is afoot, already have one hand on a set of seats with screens , hope to get my other hand on em' soon.
Look forward to hearing how its all goes!
k
AndyMAndym Expert Beverage
21st Apr 2010 10:54 pm
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Just when we thought we had this Red / Blue TMC antennea amp thing sussed, i came across something today i would like to share and which might cause a small re think.
An 06 sport with the Blue XUI500071A amp and the XRA500030 TMC unit which i thought was the Disco 3 one and i am almost sure i have had a Red one with the same TMC unit.
Here is a picture of the 2 side by side.
Click image to enlarge
Interesting to note the small unused additional stub connector beside the main one and that the Blue one also carries the same power connector as the Red.
Click image to enlarge
25th May 2010 5:40 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6902
Just found this amazing post, do I want to start cutting up my dash? You bet I do.
A wee query from those that hae already done, this, what sort of prices did you pay for all the bits?
And does anyone know of any RRS/D3s being scrapped within a few hours drive of Glasgow?Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
9th Jun 2010 7:29 am
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
Ian
Great guide as it finally inspired me to get the dremel out to chop the pocket out of my dash!
Having a d3 base, I long decided ago to go the carputer route as well as upgrading the speakers etc rather than try to do what you did. Also Memory Map and Centrafuse 3.1 are much better than the factory nav/media IMHO.
I managed to get a broke factory nav screen and butcher it to fit my 7" linitx transflective touch screen into. A job and half but gives it the factory look now!
Just need a decent OBD device to get monitoring now
9th Jun 2010 8:06 am
roveribis
Member Since: 04 Apr 2009
Location: Puerto Rico
Posts: 132
Ian (and others),
I'm very interested in doing the same.
I'm trying to figure out what I need. I'm working off a 2008 LHD D3.
It has: * HK radio 6-cd chaqnge built in, (but not the logic 7)
* voice recognition
* bluetooth telephone hands-free
* shark-fin in the top of the car
* cruise control
* Steering wheel controls: MODE, Track fwd/rev, Volume up/down,
Cruise control on/off and up/down, Voice control on
Does this mean I have a lot of the work already done?
What I really want is, first: vehicle information screen (4x4) & input a rearview camera to the OEM screen.
Secondly would be the navigation....
I need to prepare the parts shopping list, I'm sure it will take me a while to find the parts.
So any recommendations on what I need?
Thanks!
17th Jul 2010 1:31 pm
IanNP
Member Since: 17 Aug 2009
Location: Lancashire, Chorley ..ish
Posts: 204
roveribis wrote:
Ian (and others),
I'm very interested in doing the same.
I'm trying to figure out what I need. I'm working off a 2008 LHD D3.
It has: * HK radio 6-cd chaqnge built in, (but not the logic 7)
* voice recognition
* bluetooth telephone hands-free
* shark-fin in the top of the car
* cruise control
* Steering wheel controls: MODE, Track fwd/rev, Volume up/down,
Cruise control on/off and up/down, Voice control on
Does this mean I have a lot of the work already done?
What I really want is, first: vehicle information screen (4x4) & input a rearview camera to the OEM screen.
Secondly would be the navigation....
I need to prepare the parts shopping list, I'm sure it will take me a while to find the parts.
So any recommendations on what I need?
Thanks!
You will need:
the display.
Most optic with the display link in it.
You may have the dash loom already with the display connector in it. Worth having a look. If not the dash loom will need to be replaced/modified.
For navigation the loom which is part of the ICE body loom is required.
Nav CPU
GPS ant - it is easier to get a fin from a RRS (2007) as this has both the GSM and GPS in it. Otherwise you will end up taking you high level brake assembly appart - not an easy job.
Then when all is fitted you will need someone with the Fault Mate to configure it all. Land Rover dealers standard system will not.
All the parts are the same as a RRS,
Note: The US nav is not compatable with any other country - won't read UK mapping dvds etc.
So best to find a breakers in your counrty and get all the bits from that one vehicle.
The reversing camera at the moment is a work in progress.
I have got it to work (and a couple of D3 friends are testing it out) but there are still a few quwirks to sort out!
Ian..so what can I fiddle with today that ain't broken ...?
17th Jul 2010 2:13 pm
IanNP
Member Since: 17 Aug 2009
Location: Lancashire, Chorley ..ish
Posts: 204
[quote="BBS SPY"]Just when we thought we had this Red / Blue TMC antennea amp thing sussed, i came across something today i would like to share and which might cause a small re think.
An 06 sport with the Blue XUI500071A amp and the XRA500030 TMC unit which i thought was the Disco 3 one and i am almost sure i have had a Red one with the same TMC unit.
Mmmmm.
I wounder - speaking out loud...
So the red (D3) unit has a 12v feed and has a single glass connector.
The blue (RRS) has no additional feed - 12v is via the co-ax and has a dual glass connector
On the RRS side glass the glass connectors are on the same plane, ie connected together.
The overall lenght of copper in the RRS glass is more or less the same as the D3.
I did have the blue amp module on the side glass where it worked OK.
No I have moved it to the tailgate glass - where it works OK. This is until I tow my horse trailer then I usually loose the TMC signal - didn't happen when it was on the side glass.
More experiments required I think...
Anybody got a red unit going spare.?
Ian..so what can I fiddle with today that ain't broken ...?
17th Jul 2010 2:24 pm
roveribis
Member Since: 04 Apr 2009
Location: Puerto Rico
Posts: 132
Ian,
You lost me with: "Most optic with the display link in it. "
I found a display, what is a reasonable price to pay?
Thanks
17th Jul 2010 6:37 pm
IanNP
Member Since: 17 Aug 2009
Location: Lancashire, Chorley ..ish
Posts: 204
The media items are connected together via a fiber optic bus called a MOST bus (Media Orientated Systems Transport).
At the moment yours goes only as far as the radio/cd. It need to then go to the display you are going to fit. There is a connector by the gear lever where it goes up to the radio:
Here is the rear of the diplay. You can see the MOST, navigation video and power connectors:
You have the glass roof panel so I am not too sure if you can fit the smaller RRS fin.
This is the RRS fin - slimmer than a disco3 one and contains both the GPS and GSM ant:
It is held on with two bolts on a plate underneath. Also you can see the two connectors - blue=GPS, pink = GSM:
It would be best to get all the bits from a breakers.
A display here on the well know auction site anywhere from £50 to £150...so what can I fiddle with today that ain't broken ...?
18th Jul 2010 10:32 am
roveribis
Member Since: 04 Apr 2009
Location: Puerto Rico
Posts: 132
Wow... Thanks...
Were you recommend I get the parts? I'm in the USA and it's more difficult.
18th Jul 2010 3:56 pm
roveribis
Member Since: 04 Apr 2009
Location: Puerto Rico
Posts: 132
So. To get the MOST cable up to the screen, I need to replace the whole thing? or is it just a 'Y' connector?
I see that you show the cable at the center console that goes up to the radio, where/how do I connect the screen to this fiber bus?
28th Jul 2010 10:12 pm
trynian
Member Since: 03 Sep 2009
Location: California
Posts: 66
roveribis wrote:
Ian,
You lost me with: "Most optic with the display link in it. "
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
but of course i will try to contact BBS Spy
Well, I have to say thankyou 
to the site members that I have come into contact with on my OEM fitting Sat nav journey. I have a found this thread and site very interesting.
.
, hope to get my other hand on em' soon.
