Member Since: 29 Oct 2011
Location: Staffordshire
Posts: 511
Discos got new boots
Well the rims were ok, a slight buckle in the worst split tyre rim but it balanced out. +£700
Discovery 4 3.0 HSE 2010 year. I like it a lot. Now with winch 😂
1st Feb 2021 11:14 am
RogB
Member Since: 15 Jun 2018
Location: Mansfield
Posts: 1729
claim off the council ?
I think you need to provide photo evidence of the width, length and depth of the pothole, location in the road as well as road number/name etc.
I know a couple of people who have done this successfully.
I also know of someone who contacted the council without having the evidence, they advised him to get photos etc and by the time he got back to the pothole it had been filled in and his claim was denied, as apparently there was no pothole and he was lying 2011 D4 XS 305 MY12 - gone but not forgotten
Well, I say "fit", all I did was run the cable through the passenger door and tuck the CB between the seat and the centre console. Simple, convenient and works a treat although it is tiny http://www.4x4cb.com/public/item.cfm?Refer...tegory=6391978 Series 3 88 Military Green (Gone)
1983 110 V8 Masai Red (Gone)
1997 Discovery 1 XS Cobalt Blue (Gone)
1999 Defender 110 TD5 Safari Epsom Green (Gone)
2001 Freelander Sport Buckingham Blue (Gone)
2016 Discovery 4 Landmark Yulong White "Larry" (Written off)
2015 Discovery 4 HSE Luxury Corris Grey "Sol"
10th Feb 2021 7:27 am
Sylvester19
Member Since: 17 Jul 2020
Location: Central Scotland
Posts: 126
Looks a small cb, my cb's are a little too big considering they used to fit in cars a lot smaller! Sure somebody has done a neat install in a disco.
10th Feb 2021 2:24 pm
CIO
Member Since: 06 Mar 2018
Location: Bahrain
Posts: 109
Fitted an ARB compressor (the single version) just behind the right side headlight. I used a bracket designed for a Prado which is manufactured by an Australian company called Kaon. I made the bracket work by installing some rivnuts and bolting the bracket into them. Then I wired the isolator switch into the cabin and used a land rover passion small switch panel to hold it.
I'm feeling pretty pleased with myself, as it works well and looks good. I just ordered the kit to relocate the compressor air intake and I'm now looking for a location to mount the air line connector so that I don't have to raise the bonnet to use it.Chris
--
2016 D4 Landmark in the UK. 2014 LR4 SE in Bahrain.
20th Feb 2021 2:55 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
^^^^^^^^
Come on CIO you know the score by now.....no pics then it didnt happen D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
21st Feb 2021 11:41 am
CIO
Member Since: 06 Mar 2018
Location: Bahrain
Posts: 109
Whoops, here you go:
First one of the kaon mount rivnutted into place.
Compressor mounted. Apologies for the poor quality pic. I just nipped out to take it and it's dark already.
The LRP switch.
Chris
--
2016 D4 Landmark in the UK. 2014 LR4 SE in Bahrain.
21st Feb 2021 3:24 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Nice
Surprised that fits there tbh.D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
22nd Feb 2021 12:07 pm
CIO
Member Since: 06 Mar 2018
Location: Bahrain
Posts: 109
I think that space is taken up by something on the diesel engined version. USB charger is on order to fill the hole in the LRP switch mount Chris
--
2016 D4 Landmark in the UK. 2014 LR4 SE in Bahrain.
22nd Feb 2021 12:13 pm
CIO
Member Since: 06 Mar 2018
Location: Bahrain
Posts: 109
Finally received Prospeed bash guard, rock and tree sliders, compressor guard. Ordered in October and they arrived on Thursday.
Fitted the bash guard and sliders today. Was stumped by the compressor guard so will lift the car tomorrow and spend some more time figuring out where it hooks onto the chassis.
Compomotives arrived last week, but BF Goodrich are out of stock throughout the island Chris
--
2016 D4 Landmark in the UK. 2014 LR4 SE in Bahrain.
Look for the hole behind the exhaust heat shield shown at 2:46 on this video 1978 Series 3 88 Military Green (Gone)
1983 110 V8 Masai Red (Gone)
1997 Discovery 1 XS Cobalt Blue (Gone)
1999 Defender 110 TD5 Safari Epsom Green (Gone)
2001 Freelander Sport Buckingham Blue (Gone)
2016 Discovery 4 Landmark Yulong White "Larry" (Written off)
2015 Discovery 4 HSE Luxury Corris Grey "Sol"
7th Mar 2021 12:03 pm
CIO
Member Since: 06 Mar 2018
Location: Bahrain
Posts: 109
Thanks Andy
Once I got under the car for a proper look it was obvious that the only place it could be fitted was that hole. Fitted without issue after using a few blocks of wood and a jack to hold the thing in place whilst I got the bolts in. The compressor guard is really heavy duty / heavy.Chris
--
2016 D4 Landmark in the UK. 2014 LR4 SE in Bahrain.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
heavy.
