Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Chirping Noise
Coming from the engine bay at idle when stationary to approx 1100 when stationary then disappears.Only have noticed in the past day or so after cold starts and have forgotten to kep an ear out after a decent journey.I take it is a belt slipping or pulley/bearing on the way out.Anyone any ideas ?
10th Oct 2009 10:14 pm
jkp
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
Sound like the pulley/bearings. The belt slipping would be probably more noticeable than a chirp/squeak. Maybe a little squirt of WD40 might prove the issue on the pulley/bearing. Obviously not on the belt though
You should be able to pinpoint the area when ticking over
10th Oct 2009 10:21 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Cheers Jon , I'll try that Been through a fair bit of water over the past few weeks so that might have some bearing on it aswell.Thanks.
10th Oct 2009 11:22 pm
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
Could just be the belt slipping. I think you can get special stuff to spray on the belt?“There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
11th Oct 2009 2:33 am
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Looks like it's bet pretensioner bearing on its way out.Gave it a good shot of oil , which had some success in that it quietens it after about 10 to 15 seconds from starting.
Theres a fair bit of vibration showing on the tensioner itself at idle.Is this normal or should it be rock solid , anyone ?
11th Oct 2009 12:24 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15245
That's what it looks like when it goes.
I didn't experience any noise with mine until it went.
Then it sounded like roller shutters being pulled up and down.
But I did manage to drive it all the way from Northumberland to home in North Yorks without it coming to bits.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum