AAA
Member Since: 23 Jul 2009
Location: Berks
Posts: 35
![](templates/vbnew/images/spacer.gif)
![2012 Discovery 4 3.0 SDV6 HSE Auto Bournville 2012 Discovery 4 3.0 SDV6 HSE Auto Bournville](../images/veh/bournville.gif)
|
Removing roof comms pod phone mast |
|
I've an 06 D3 which has PTI fitted - and has the lump on the roof. As this only contains a GSM antenna - & I use a bluetooth phone - can the roof pod be removed?
I think my only concern is what's left behind after removal - guess there'll be a hole - can this be bunged readily or should I leave the pod & worry about more important things in life...
thanks,
|
11th Oct 2009 11:23 am |
|
|
craig
Member Since: 08 Aug 2006
Location: Home of LR.
Posts: 2545
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 Base 7 Seat Manual Cairns Blue 2006 Discovery 3 TDV6 Base 7 Seat Manual Cairns Blue](../images/veh/cairns_blue.gif)
|
Leave it in place if i was you.
Less hassle and less chance of water entering.
|
11th Oct 2009 11:29 am |
|
|
simoniz
Member Since: 28 Oct 2007
Location: The green green grass of home!!!!!
Posts: 3757
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 7 Seat Manual Buckingham Blue 2005 Discovery 3 TDV6 Base 7 Seat Manual Buckingham Blue](../images/veh/buckingham_blue.gif)
|
Having just fitted one of these yesterday,I am assuming its the LR fin unit we are talking here,I can tell you its a bit of a to get at!!!. Roof lining down at the back required which means pulling off trim on rear pillars to allow sufficient movement-no issue until you have to try and push fit the trim back on,clips breaking a plenty (Nick expect a call from me tomorrow............)
Once you have removed the unit you will need the roof blanking plate to replace externally what was previously fitted to ensure the hole and surrounding area are sealed- guess either breakers or Nick @ Yeovil LR could help.
Overall if it was me I would say leave it alone,looks 8) IMHO
|
11th Oct 2009 4:20 pm |
|
|