Member Since: 16 Sep 2007
Location: UK
Posts: 6019
Power Polisher
I piucked up a lot of scratches today on the Petersfield recce, so I will need to use a power polisher. Never used one, so what polish do you use with them to remove the surface scratches.
Any tips.
28th Jun 2009 4:25 pm
jkp
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
A reasonable guide if not too American. Gives an idea of what you need to do.
Key things, not too much polish, work it properly until clear and always check as you go.
Tape up panel gaps, plastics and rubbers so as not to damage or mark them
Only thing to remember that it is not a quick job. To do a D3 give yourself the best part of a day using a DA unit. For a single stage polish on a D3 with a rotory it takes me >6 hours after washing/clay and tape prep.
28th Jun 2009 5:58 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72969
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum