Member Since: 18 Apr 2008
Location: away
Posts: 10723
Top install, its the way I am going too, screen display up top is a great idea, well done
9th Jul 2008 12:58 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26744
A quick question regarding this modification. Does the car radio/cd have to be switched on to allow the Parrot to use the car speakers?
In other words, if I was driving along with the radio off, and a phone call came in, would I have to switch the radio on to be able to hear the caller?
9th Aug 2008 3:24 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
Member Since: 18 Apr 2008
Location: away
Posts: 10723
My works with the radio off too, maybe its because its a 3200 (colour screen) and that it was fitted by a pro who knew his stuff. I listed his details in one of my threads. Totally happy with it and now displays the Landrover logo thanks to COUNTRYWIDE on here.
I've had real problems with mine over the past few weeks - the other person couldn't hear me at all. Turns out the microphone was duff, so fitted a new one and all good again Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
9th Aug 2008 7:06 pm
toxxic
Member Since: 27 Jun 2011
Location: Saskatoon
Posts: 87
Ok after a bit of research I think I have figured out how to install it. I got the wiring harness for 10 and a used ck3100 for 47.50 off ebay. Its being delivered to my UK adress and I'm going to bring it to Canada to fit on my LR3. Hope it works ok. I have a question.
Do I have to unplug the battery before installing the kit?
Also, currently my LR3 doesn't have bluetooth buttons on the steering wheel. I have ordered a replacement steering wheel radio buttons with telephone. Does anyone know that once i replace my old buttons with this new one will the parrot ck3100 work with it? or do i have to change some other wiring?
21st Jun 2012 4:49 am
toxxic
Member Since: 27 Jun 2011
Location: Saskatoon
Posts: 87
I got the Multicomm kit and the Parrot CK3100 LCD. Now the multicomm has to be connected to the Parrot CK3100 LCD Interface for power and keypad adaptors. The multicomm has these wires.
red - power
black - ground
green - ?
brown-yellow - ?
Purple - V1
White - V2
Yellow - Mute
Now I can connected all of them except I don't know where to connect the green and the brown-yellow wire to on the interface since there are 7 wires there
Red - power
Black - ground
Green - ?
White - ?
Yellow - ?
Orange - ?
Copper - ?
Now the red and black from multicomm attatch to the red and black on multicomm interface but i don't know where to attach the green and yellow-brown wires from multicomm. Any ideas anyone? I know that the parrot LCD connects to the parrot blue box with 8 pins. Anyone have any wiring diagrams for those 8 pins.Land Rover LR3 SE v4.0
Matte Black Wrapped with Chrome Edging, Front Grille, Aftermarket Reversing Camera, Aftermarket Parking Sensors, Curt Class III Hitch,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
