Fojtik Design
Member Since: 30 Sep 2024
Location: Brno
Posts: 2
|
| LR D4 - Additional lighting - interior/door |
|
Hello gentlemen. I'm going for advice, because I really don't know what to do with it! I have a LR Discovery 4 (2011). in SE trim. When I took off the door trim, I noticed that there are wires ready for those "puddle lights". When one opens the door, it just shines outside onto the ground. So I peeled off the plugs, snapped the lights in there, as well as in the interior at the feet (driver, passenger). And wonder, it lights up! BUT front door driver and passenger nothing! I measured and only these cables do not get juice! The back door is on, the footwell is on as well... I checked the fuses and found no problem.
Has anyone solved this? Addition of equipment that was not there from production?
|
 30th Sep 2024 6:00 pm |
|
|
|
|
Fojtik Design
Member Since: 30 Sep 2024
Location: Brno
Posts: 2
|
Hello, thank you for your reply. I read your whole old thread. Unfortunately it didn't solve my problem. I only have one original halogen light to test and it doesn't light up as well as the new LED light. I measured the voltage of the cables and it is 0 V. Left and right doors the same. 
|
| 30th Sep 2024 9:31 pm |
|
|
