Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
  
|
So next weekend I’m going to attack the gearbox plan is drop pan drop mechatronic unit fit new gaskets fit new plastic cup put it all back together fill with oil see if that cures the judder without dr tranny if not I’ll put it back in 😂😂 only thing I don’t want to do is clear adaptations we have just done this on a l322 and it’s started acting up so I’m against doing it on the d3 anyone have any knowledge on the gap and the adaptations clear cheers
|
 15th Sep 2024 7:42 am |
|
|
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
That’s what I plan on fitting
|
| 15th Sep 2024 7:44 am |
|
|
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
  
|
What is that kit for? Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
|
| 15th Sep 2024 1:13 pm |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
?si=49eGgq1AE-GRc-Oc
|
| 15th Sep 2024 3:36 pm |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
Skunk38 better off watching than me explaining buddy
|
| 15th Sep 2024 3:37 pm |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 705
|
skunk38 wrote:What is that kit for?
Those seals fit between the valve body and the trans except for the tubular one is where the electronics enter the trans and plug into the mechatronic unit (trans ECU).
|
| 17th Sep 2024 1:44 am |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
As below
Last edited by Cheeko on 17th Sep 2024 7:48 am. Edited 1 time in total
|
| 17th Sep 2024 7:46 am |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
loanrangie wrote:skunk38 wrote:What is that kit for?
Those seals fit between the valve body and the trans except for the tubular one is where the electronics enter the trans and plug into the mechatronic unit (trans ECU).
Is it something you have done only just worked out how to reply properly 😂😂
|
| 17th Sep 2024 7:47 am |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 705
|
Yes i did a valve body rebuild early last year, new solenoids.all seals, sonnax zip kit (repair/improve kit) and separator plate.
I didn't have any shuddering but i did have poor shifting, works like new now.
|
| 17th Sep 2024 8:15 am |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
I had bad shudder but I’ve put dr tranny in and it seems to have solved the issue but I don’t like the idea of changing the viscosity of the oil so I want to try this kit if it doesn’t work I will in due course fit a new torque converter but it’s not something I want to do as I would probably do it myself and it doesn’t look an easy job
|
| 17th Sep 2024 2:23 pm |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
|
loanrangie wrote:Yes i did a valve body rebuild early last year, new solenoids.all seals, sonnax zip kit (repair/improve kit) and separator plate.
I didn't have any shuddering but i did have poor shifting, works like new now.
Bet that was a job and half I’ve seen it done but looks quite complex
|
| 17th Sep 2024 2:25 pm |
|
|
