Member Since: 31 Jan 2019
Location: Belfast
Posts: 24
Wiper change
Apols as I know his has been covered before but I cannot find it.
How do I park the wipers at the peak of their sweep so I can easily reach and change the passenger blade?
2nd Aug 2020 6:49 pm
Disco3newbie
Member Since: 26 Oct 2008
Location: Scottish Borders
Posts: 605
You don't need to (and probably can't) . Passenger blade easily changed from passenger side....takes about 2 minClub RLD spare wheel protection
Club RLD skid plate
Club its all black
Club D3 - it's gone
Club D4 - just arrived and still all black
3rd Aug 2020 7:18 pm
Dannyson
Member Since: 14 Oct 2014
Location: Newquay, Cornwall
Posts: 820
I've changed wiper blades on many cars on all kinds of brands for around 50+ years - including my wifes Toyota a few weeks ago.....
But I cannot change the blades on this bloody LR - even my 43 year old son (who works for Volvo - and regularly goes out to customer cars on the forecourt to change theirs) gave up!
I watched the LR chap change my front ones a while ago - but no..., I still can't do it FFS! 2016MY Discovery HSE - Black
2009MY Toyota Land Cruiser (Lc4) - Black
3rd Aug 2020 9:47 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14120
4th Aug 2020 12:15 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10674
I fitted a new passenger blade 4 years ago.
Can I get it off? No!
Even got the wd40 on it. Still don’t want to budge
4th Aug 2020 5:46 am
Scott #55
Member Since: 15 Apr 2015
Location: UK
Posts: 1683
I'm sure the wipers on my 2010 D4 have the same fitting as most of the other cars I've owned. Am I missing something?
4th Aug 2020 5:46 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14120
Pete K wrote:
I fitted a new passenger blade 4 years ago.
Can I get it off? No!
Even got the wd40 on it. Still don’t want to budge
Hi Pete
Had that with my drivers side , ended up using a small screwdriver ( by the bottom arrow ) to slide it up the arm to lift the small plastic part out of the hole, or using long nose pliers to also get the clip out of the hole , then sliding the wiper blade towards u
Ps hope this finds u well mate
Click image to enlarge
4th Aug 2020 6:23 am
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138
I put a new set on my D4 about a month back. Took about 2 mins.
Not sure what everyone is finding complicated about it
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
4th Aug 2020 7:28 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10674
Yeah I know changing a wiper blade is fairly easy (certainly the removal part )
Mine are cheap aero ones (but lasted very well). Must be rusted on
In fact they are exactly the same as the ones in the video
If they won't budge next time I will have to remove the arm. (thankfully had the arms off in February)
4th Aug 2020 7:34 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1656
Troutnut
I’ve not managed to find a way of parking the wipers arms or being able to pull them away so they stay away from the wind screen to make changing easy. It seems you have to do it from the bottom parked position and hold the arm out from the windscreen while you’re changing the blades. Never found anything in the manual about how to do it either, so assume not possible.
CheersGary
-------------------------------------------
Discovery 4 HSE 2016MY
4th Aug 2020 9:08 am
Biffysun
Member Since: 09 Jul 2011
Location: Central
Posts: 1790
Try switching wipers on then switch ignition off at the point you want them stopped, never had to do this but if it helps?
4th Aug 2020 10:38 am
Nick H
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
Make sure the ignition is switched off.
Switch the ignition on and then off again.
Immediately press the wash/wipe control to its lowest position, as if to command a single wipe. Hold this position while switching on the ignition again. The wipers move to the service position.
When the new parts have been fitted, switch the ignition off. The wipers return to the park position.
MY16 Landmark - Yulong White
MY10 HSE - Stornoway Grey
4th Aug 2020 11:50 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14120
Pete K wrote:
Yeah I know changing a wiper blade is fairly easy (certainly the removal part )
Mine are cheap aero ones (but lasted very well). Must be rusted on
In fact they are exactly the same as the ones in the video
If they won't budge next time I will have to remove the arm. (thankfully had the arms off in February)
U saying about the arms I had a terrible job getting them off, had to use a puller in the end as no way were they budging
Got Aeros twins on mine and must admit this time not overly impressed with them, will try some other makes next time, terrible in heavy rain
4th Aug 2020 10:35 pm
Farmer Chalk
Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4195
Can I also suggest putting a towel or something soft under where the blade/arm parks in case it slides out of your hands during the process... the spring in the arm is very strong and will slam the arm back into the windscreen with great force....
Enough to crack your new windscreen....don’t ask me how I know....
5th Aug 2020 6:20 am
Troutnut
Member Since: 31 Jan 2019
Location: Belfast
Posts: 24
Thank you NickH.
That is exactly what I failed to remember.
Tried this morning and two wipers easily changed.
Cheers again
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
