Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
interior refurbishmnet of my D3
This is a LHD car, so driver sit required some attention:
Click image to enlarge
Click image to enlarge
Click image to enlarge
after fixing before painting:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Completed front seats:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Front and rear seats: - no real markable color difference between front (cleared) and painted (front) seats:
Click image to enlarge
New headliner:
Click image to enlarge
Next step:
All pillars
All interior plastics
New Instrument Panel
12th Sep 2023 7:13 pm
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1061
Proper job "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
13th Sep 2023 9:00 am
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
Roof in place:
Click image to enlarge
Click image to enlarge
Pillars will come
13th Sep 2023 9:15 am
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
and now things getting back where they should be:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
13th Sep 2023 9:34 am
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1825
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4235
You'll be putting it back together in much better condition and better fitted than when it left the factory I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
13th Sep 2023 10:08 am
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
Thanks Nigel. Appreciated.
Well, all technical overhauling things completed from total disassembly to assemble process - now the focus is on the interior..... almost took 1,5 years until now.
13th Sep 2023 11:01 am
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
Pillars are progessing nicely:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
13th Sep 2023 3:54 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4235
Fair play Robert, that's some project ... I was going to take the mats out of mine and give the front a vac over the weekend but it didn't get done I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
13th Sep 2023 7:21 pm
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
this started small, but now almost every piece of the car touched
13th Sep 2023 7:42 pm
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
center console:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
14th Sep 2023 10:14 am
Captain Crosscheck
Member Since: 03 Sep 2021
Location: Oslo
Posts: 335
Must say, this is an impressive piece of work! Good to see someone tackle the interior for once, and not just the eternal oil pumps and suspension arms
14th Sep 2023 11:29 am
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
trying to achieve a factory new / showroom status
actually over the technical overhauling process - 100+ new parts were used until the last clips and bolts + plus the engine.
current phase is the interior, here some new parts will be required.
3rd phase is exterior (paint job) and accessories - only genuine JLR ones (winch and snorkel installed only yet)
14th Sep 2023 12:49 pm
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
next step is fixing the door cards:
Click image to enlarge
Click image to enlarge
Click image to enlarge
15th Sep 2023 8:25 am
grob1971
Member Since: 21 Aug 2020
Location: Zug (ZG)
Posts: 80
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum