Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Is this Trailer electrics loom ruined?
After mentioning that I needed to install trailer electrics to my Discovery 3, I was given this (for free) and told that some of the plugs had been cut off it.
The loom on one side of the grommet looks like it is intact, but on the other side (shown in the final picture) it looks as if five plugs have, for some reason, been cut off.
Is it something that I can easily make usable by buying the plugs (if so, how would I source them), or should I just buy a new one?
28th Sep 2022 10:04 am
SPO
Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Looks like the photos weren't added to the message.
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
28th Sep 2022 10:06 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18557
Bear in mind you also need the second part, the part with the actual trailer socket(s) on.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
Looks to me like the plugs beyond the grommet is where it plugs into the LR Loom behind the rear passenger side. The fuse box goes behind the rear passenger side where the tow hitch is usually stored. The other ends (from the grommet onwards) are the wiring for the two 7 pin plugs that you connect you trailer/caravan to. In which case, all you need to do is add the plugs ensuring the correct wires go to the correct plugs.
Bear in mind you also need the second part, the part with the actual trailer socket(s) on.
So how does it work then? Does the loom come in two parts? So if I bought the ebay item you've linked to, would I also have to get something else? And if so, are there any kits that include both parts? I want a 13 pin plug.
28th Sep 2022 12:34 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18557
Yes, there are two parts to the genuine LR wiring kit.
The section you have (and I have linked to), plus another section with the actual tow sockets on.
You can buy a complete new aftermarket wiring kit for £70-£80.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
28th Sep 2022 12:51 pm
SPO
Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Ivan wrote:
Looks to me like the plugs beyond the grommet is where it plugs into the LR Loom behind the rear passenger side. The fuse box goes behind the rear passenger side where the tow hitch is usually stored. The other ends (from the grommet onwards) are the wiring for the two 7 pin plugs that you connect you trailer/caravan to. In which case, all you need to do is add the plugs ensuring the correct wires go to the correct plugs.
HTH
Ivan
It is probably becoming obvious I don't know much about this....
If the bits that have been cut off are actually the two trailer plugs (which I assume it would be easy to source), and there are 5 different cables that have been cut, what would I do with the other three cut ends?
28th Sep 2022 1:07 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18557
I linked to a full intact loom, and mentioned there is another loom missing.
You can see from the in tact loom that the trailer sockets don't fit on this loom.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
28th Sep 2022 1:12 pm
SPO
Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Martin wrote:
Yes, there are two parts to the genuine LR wiring kit.
The section you have (and I have linked to), plus another section with the actual tow sockets on.
You can buy a complete new aftermarket wiring kit for £70-£80.
Does this item (£84) have everything I would need?
Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Martin and Ivan,
Thanks for the advice.
I'm going to order the order the one from Maltings 4x4.
SPO
29th Sep 2022 9:50 am
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4234
Just be aware that if towing a trailer with LED lights the electronics in the Disco 3 are not set up to recognise it (not enough resistance from the lights) so you'll either need to fit resistors to the trailer or if towing different trailers on a regular basis invest in one of these
And you don't need to take the rear bumper off to fit the electrics (despite what it says in the instructions), max of an hour even if you've not done it before ! Enjoy!I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
29th Sep 2022 11:57 am
SPO
Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Ok, thanks for that.
At the moment, I'm not sure what trailer I will have, as it is likely to come with the second hand boat I am trying to buy.
I'm setting up the car to be ready to bring the boat back home after I've bought it.
29th Sep 2022 12:54 pm
SPO
Member Since: 26 Aug 2021
Location: West Midlands
Posts: 22
Urgent. Sunday am, 2 October.
I've just come all the way to Croydon (From West Mids) to pick up a boat, and realised that I've left the key to my detachable Disco3 tow bar at home!
Does anyone know of anything I can do that won't necessitate doing another round trip?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
