Member Since: 23 Apr 2019
Location: Swadlincote
Posts: 126
No communication
Hi all
FBH didn’t activate the other morning so plugged in the Iid tool and it failed to activate the fbh with error code E3
I had a quick look under the bonnet and the remote unite has a solid red light on it, and after checking the manual appears to be no communication with fbh controller.
Any guides to how to proceed / tips where to look.
I have tried looking for a thread but there is one or two and couldn’t find one that seemed to have the issue.
Thanks in advance
Baz
28th Nov 2021 8:03 pm
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1072
Good luck "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
29th Nov 2021 2:33 pm
Baz31
Member Since: 23 Apr 2019
Location: Swadlincote
Posts: 126
Hi
Thank you, had a look and started the diagnosis.
Got as far as replacing the fuse 28 as it had blown.
Did a fault read with iid and got the below.
Think further work is to be required when I work out what needs to happen next.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
