Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Faults & Fixes (D4)

Voltage on height sensor
Post Reply  Down to end
Page 1 of 1
Brooksie69
 


Member Since: 09 Jun 2014
Location: Wigan
Posts: 176

United Kingdom 2015 Discovery 4 3.0 SDV6 SE Tech Auto Corris GreyDiscovery 4
Voltage on height sensor

Hi guys can someone answer a question about height sensors?
My 2015 Disco 4 is riding very harsh at the moment, it is normally very smooth I feel every bump in the road. (tyre pressures are all correct)
I have taken readings of the suspension height and all seems fine, no warning lights or faults on the IID however when I look at the voltages on the height sensors I have 2.4 to 2.9 on three sensors but 0 on the front right!
Could the sensor be faulty as having no reading voltage wise? and could this be the fault with the bumpy ride?
The suspension does go up and down ok and if left in high it will warn me and drop to standard above 30mph.
Thanks for you input as always.
Brooksie.
 ...........One life live it..........  
Post #223256926th May 2021 6:00 pm
View user's profile Send private message View poster's gallery Reply with quote
MikeO
 


Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1390

Scotland 

Do you have access to a diagnostic tool for live values? Failing that what does the 4wd info display show? Is that sensor out of kilter with the others?
 2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone 
 
Post #223257226th May 2021 6:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Brooksie69
 


Member Since: 09 Jun 2014
Location: Wigan
Posts: 176

United Kingdom 2015 Discovery 4 3.0 SDV6 SE Tech Auto Corris GreyDiscovery 4

I have taken the live voltage values from my IID tool.
The other 3 sensors show a value but the front right sensor is 0.0volts..
4x4 screen shows everything in line.
Thanks Mike
 ...........One life live it..........  
Post #223257326th May 2021 6:26 pm
View user's profile Send private message View poster's gallery Reply with quote
MikeO
 


Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1390

Scotland 

Ah, sorry, re-reading I see you mention IID. Have you checked the calibration mode to see the readings (rather than voltages)? I recall there being values around the 1000 mark. You could try a calibration on just that corner to see if it has the expected effect? ie the height changes in the expected direction. The change is not always immediate / obvious though. And make a note of the original value (the IID may do this for you). Or measure the voltage at the sensor itself. Both feed and output?
 2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone 
 
Post #223258226th May 2021 6:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Brooksie69
 


Member Since: 09 Jun 2014
Location: Wigan
Posts: 176

United Kingdom 2015 Discovery 4 3.0 SDV6 SE Tech Auto Corris GreyDiscovery 4

I will try to take readings from the plug when I get it on a ramp.
Always a bit nervous of altering any settings especially on EAS, just incase I make a pigs ear of it. Thanks Mike.
 ...........One life live it..........  
Post #223258326th May 2021 6:48 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site