Member Since: 22 Oct 2017
Location: nope
Posts: 24
LR3 suspension assistance needed
Hello,
LR3 has the red suspension light on. Nanocom showing 3 error codes:
C1A13: Pressure does not decrease when venting gallery (Permanent)
C1A00: Control Module (Permanent)
U0421: Invalid data received from ride level control module (Pending)
All of this started after fitting a new compressor and 2 rear bags.
How should I start troubleshooting this?
Help.
Matt
25th Aug 2020 9:45 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1797
I would do a reset of the system. Then pull compressor relay, jumper the two big slots (ign in position 2) and check that compressor runs okay. After that I would recheck all the electrical and mechanical connections you made when changing compressor and struts.
25th Aug 2020 11:28 am
disco4ever
Member Since: 23 Dec 2013
Location: under the car
Posts: 402
have you changed from Hitachi to AMK compressor?Achim
own garage certified LR tech
Disco 2 TD5 MY 2001 - gone but still driven by another owner
Defender 110 TD5 driving me bananas with all faults
Disco 3 TDV 6 HSE MY 2005 gone @280.000 km
Disco 4 SDV 6 HSE MY 2012
25th Aug 2020 12:10 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10502
first code is compressor related
25th Aug 2020 12:29 pm
thumperer
Member Since: 22 Oct 2017
Location: nope
Posts: 24
AMK compressor replaced with AMK as per part number by the vehicle VIN.
Are there any suspension gurus on this forum? (fingers crossed).
25th Aug 2020 5:30 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13854
Hiya
Indeed ur prays have been answered Ref suspension gurus , members above ^^^^^^^
25th Aug 2020 6:48 pm
thumperer
Member Since: 22 Oct 2017
Location: nope
Posts: 24
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum