Member Since: 26 Mar 2020
Location: BARNET
Posts: 84
Rear view camera
Is it possible to fit a rear view parking camera that will link into the nav screen.
29th May 2020 5:17 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
Well. Yes. Not necessarily easy.
Have you got a gap iid tool ?
29th May 2020 5:43 pm
Barnetman
Member Since: 26 Mar 2020
Location: BARNET
Posts: 84
I have no access to any special equipment. I was thinking of getting it fitted by a specialist.
30th May 2020 8:43 am
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
You could fit a gvif unit or a D4 screen both will let you have a camera installed with the d4 screen you will need a IId tool to edit ccf with the gvif you won't i also believe there is a ccf edit with original screen to get the screen up on original D3 nav screen now Discovery 3 se gone
Range rover sport supercharged here:)
30th May 2020 8:53 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
The ccf edit on original screen
Is that the RR mod or something new ?
The RR mod is a very budget version.
You don’t get a full picture
You need a gap iid to ccf edit
The display interface is a bit flakey in RR mode
Last edited by Pete K on 30th May 2020 9:52 am. Edited 1 time in total
30th May 2020 9:35 am
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
To be honest i thought i saw that on here that it would work but as always i will be corrected i will look and see if i can find it again Discovery 3 se gone
Range rover sport supercharged here:)
30th May 2020 9:39 am
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
As i saw both options.. i opted for a D4 screen, with a more or less "standard" licence plate light camera (although i bought a higher resolution than "standard").
-D4 screens can be bought rather cheap (paid 80 quid)
-rather easy install (how to is here on the forum, look for user "flack") i might say, i did it in an hour i think. camera wire through the rear door and interiour is a little bit more work, but needed for both alternatives
-simple CFF edit (IID)
-works as it should.... (no extra button pushes needed, just in reverse gear and it works as it should)
looks and works as a factory option then..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
30th May 2020 10:24 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
An hour! Blimy
To fit the cam or d4 screen
30th May 2020 7:21 pm
mick_n3
Member Since: 19 May 2017
Location: Kettering
Posts: 427
geoffsnook wrote:
also believe there is a ccf edit with original screen to get the screen up on original D3 nav screen now
You can with the RR mod CCF edit
[/img]
M6NIO
30th May 2020 7:45 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
To the two last posters.... reading is not your strongest points i see...for the both of you....
@peter K, i wrote The d4 screen AND that the camera is more work...
There are 2 how to’s here, it is pretty straight forward if you read them both a few times can be half an hour longer, but not much more.... i have in mind, anyway taking/pulling the 3 pins out the big connecter So they could be re used in the new d4 connector took the most Of my time.. pfff
A day before i did a lot of plastic saw things with a dremel on the D3, as i had to convert it to a commercial version, so was very handy and quick with that part...
@mick-3n. They covered the RR mod allready as A rather “budget version” and were talking about a possible other mod...With full D3 function.. Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
30th May 2020 9:37 pm
mick_n3
Member Since: 19 May 2017
Location: Kettering
Posts: 427
Can't get more of a full D3 function than a D3 screen that does everything, actually more, you get all radio and phone functions on main screen
M6NIO
30th May 2020 10:06 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
When I fitted the D4 screen, cutting the rear plastic out took the time.
It was catching on something but took a while to work out what
30th May 2020 10:26 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Yeah, you need to remove a fair bit, so the connectors and cables have their space... that is a bigger Catch than the metal/screen itself...Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
31st May 2020 8:50 am
Barnetman
Member Since: 26 Mar 2020
Location: BARNET
Posts: 84
Thanks for all the replys,it seems to be a lot more involved than I thought and very technical.
I think I will just stick with the standard reversing sensors.
I
3rd Jun 2020 10:45 am
oldandslow1
Member Since: 07 Oct 2018
Location: Abergavenny
Posts: 63
Hi Mick_n3, did your mod include any brightness control or does it not suffer?
I am looking to put in a camera and am wondering which is best way to go with screens:
- cheap RR mod...if brightness is ok
- more expensive D4 screen
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum