Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Technical (D3)

Oil System Schematic
Post Reply  Down to end
Page 4 of 4 <1234
KostasA
 


Member Since: 23 Aug 2015
Location: nairobi
Posts: 286

Greece 

yes both bought from VDO, not a cheap buy....  
Post #210129322nd Nov 2019 1:16 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10673

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

well you could fit a mechanical test item to confirm the low reading. as a test while stationary

does the engine sound noisy at the top ?

could be crank bearings or oil pump.

what year / milage  
Post #210129722nd Nov 2019 1:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10673

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

https://www.disco3.co.uk/forum/tdv6-oil-pr...l+pressure

Pete K wrote:
Laughing


The landrover manual tells me to check it at 3500 rpm after a 6 mile journey. It doesn't tell me what value to expect though Rolling Eyes

The Citroen manual tells me it should be between 1-4 Bar at 2500rpm when cold

Jag manual says minimum 7psi at idle
above 2500RPM minimum 14.5psi
maximum 58psi


I'm getting 20psi (1.4bar) on idle
and 50psi (3.4bar) when revved.

when cold:
50-55psi idle
over 60psi @2500rpm which is too much really, buts its only at cold
  
Post #210129922nd Nov 2019 1:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10673

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

actually I may have worried you without reason Embarassed

I think yours fits in with the above  
Post #210130222nd Nov 2019 1:27 pm
View user's profile Send private message View poster's gallery Reply with quote
KostasA
 


Member Since: 23 Aug 2015
Location: nairobi
Posts: 286

Greece 

Pete K wrote:
well you could fit a mechanical test item to confirm the low reading. as a test while stationary

does the engine sound noisy at the top ?

could be crank bearings or oil pump.

what year / milage


i had oil pump and bearings changed around 30.000Km back so i would expect anything on that side. will check it again static and confirm readings.  
Post #210130322nd Nov 2019 1:28 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 4 of 4 <1234
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site