Member Since: 21 Oct 2016
Location: kent
Posts: 13878
Retro fitting a D4 steering wheel in a D3
Hi
Well I’ve got the steering wheel and both switches , along with an extra loom that plugs into both switch packs
Black box pcbs are also on there way
Currently looking for a D4 steering wheel airbag , because I see there flat , D3 airbags have a raised section
When I fit the cruise control switch, what do I need to set the iid Onto plse
Many thks as always
13th Sep 2018 1:09 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Airbags are the same, no difference between D3 and D4
Re-use your current airbag, it'll fit. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
13th Sep 2018 1:41 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13878
Hi narpy
Excellent , the D3 ones have like a triangle shape and the D4 ones looked flat, must be the trick of a picture then, great there all the same, happy days
Does it matter looking at the new loom there is an extra red wire , ideally wish to fit the new loom so it’s nice and new
Also on the back of the switches u have the small pin connectors , the horizontal ones, is that for another accessory plse
Many thks as always
13th Sep 2018 2:55 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
There was an issue with later steering wheels not being fully compatible with earlier vehicles.
I didn't suffer this but it is documented somewhere on the forum.
I cannot advise regarding the new loom either, best option, swap the circuit boards over, plug everything up and see what works or doesn't work and go from there.Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
13th Sep 2018 4:16 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13878
Bless yer and will do
Pcbs Should be with me next week
Thks again kind sir
13th Sep 2018 6:05 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Wheels are compatible up to 2012 thats what i have on mine so know they work Discovery 3 se gone
Range rover sport supercharged here:)
13th Sep 2018 8:19 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Don't forget you can have it heated and flappy paddles on it so there are extra connectors Discovery 3 se gone
Range rover sport supercharged here:)
13th Sep 2018 8:21 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13878
geoffsnook wrote:
Wheels are compatible up to 2012 thats what i have on mine so know they work
Thks , believe the one I have is a 2010
13th Sep 2018 11:07 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13878
geoffsnook wrote:
Don't forget you can have it heated and flappy paddles on it so there are extra connectors
Hi
Many Thks, I saw that but assumed u needed to have a heated steering wheel in the beginning along with a heated rotary coupling
Just ordered the new pcbs which should be here next week , I now have the cruise control switch
Also saw the extra adaptive cruise control, imagine that’s also an expensive add on with the extra special front sensors req
Thks again
13th Sep 2018 11:13 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
I don't think the adaptive cruise works on L319, I can't remember the exact reason for that but I'm sure it just didn't work.
If you've gone for the none heated version it's a very straight forward mod.
You could, incidentally, activate cruise control before your boards arrive so it should just be a simple question of installing all the hardware for it to work.
I've done a couple of steering wheel upgrades using the BB boards and on each occasion I have needed a very fine file to dress out the double drilled hole in the circuit boards.
That advice will become clearer when your boards arrive. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
Adaptive cruise control requires more, it has its own ecu, and radar sensors, I did a lot of testing in the early days with Colin from BBS on how to get it to work on a D3, on my own car, it did work to a fashion but not safely enough so the project was abandon, just not worth the effort.
Flack
14th Sep 2018 9:25 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10548
Is there a link to these adaptor boxes ?
14th Sep 2018 11:02 am
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Adaptor boxes???????Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
14th Sep 2018 11:44 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13878
Narpy wrote:
I don't think the adaptive cruise works on L319, I can't remember the exact reason for that but I'm sure it just didn't work.
If you've gone for the none heated version it's a very straight forward mod.
You could, incidentally, activate cruise control before your boards arrive so it should just be a simple question of installing all the hardware for it to work.
I've done a couple of steering wheel upgrades using the BB boards and on each occasion I have needed a very fine file to dress out the double drilled hole in the circuit boards.
That advice will become clearer when your boards arrive.
Thks and indeed the adaptive looks like a lot of hard work for not much gain
Ref the heated, does it just need the extra blackbox pcb and rotary coupling plse
Have got some small files, thks for the heads up, delivery is due on the 18th sep , there was a delay because I had to then after pay via paypal
Thks again
Last edited by gstuart on 14th Sep 2018 1:48 pm. Edited 2 times in total
14th Sep 2018 1:43 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13878
Flack wrote:
Adaptive cruise control requires more, it has its own ecu, and radar sensors, I did a lot of testing in the early days with Colin from BBS on how to get it to work on a D3, on my own car, it did work to a fashion but not safely enough so the project was abandon, just not worth the effort.
Flack
Read that link and see what u mean of how much is involved
Bet that woke u up then as u was waiting for the disco to brake as u got closer and closer to a vehicle in front
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum