Member Since: 04 Feb 2017
Location: Falkirk
Posts: 354
Front CV joints - which end CV (inner/outer) comes off
Hi,
I am stripping, or trying to strip the front drive shafts on my D3 to fit new CV boots. Rears were a doddle - shaft and CV/rollers come out of the inner CV bell and you do both CV boots from that end of the shaft.
When I moved on to the front it was not that simple - Inner CV does not slide out of it's bell - there is what looks like a peening mark on each race that stops the CV from being with drawn from the bell -see highlighted below:
Then had ago at driving the CV star off the shaft at both ends - no luck. Decided to stop and find out which end is actually removable before I damage it.
So the question - Which end(CV) of a D3 front drive shaft is meant to come of the shaft - inner CV or outer CV?
Thanks!
AdrianSeries one 1949 - in bits, chassis is strapped to the ceiling in my garage (beside the canoe)
LR 90 - In bits
Disco 3 - currently in bits
15th Jan 2021 4:50 pm
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1047
Good luck"Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum