Member Since: 22 Apr 2012
Location: Rome
Posts: 2327
HELP : EGR throttle command/position
Hi guys, in the last week i have had some issues from the rh EGR. In particular after engine shut down this valve can not cycle the 0% to 100% functional test but stops at maximum 40%.
So looking by iidtool i have selected also the egr throttle command and egr throttle position, but curiously while driving these values are stucked as per picture attached.
Is this normal?
Which one is the egr throttle?
Thanks for help
- Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
Last edited by Sidestick on 21st Feb 2018 5:26 pm. Edited 1 time in total
21st Feb 2018 5:07 pm
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2327
Just to be clear the egr throttle command value goes to 0% after engine stop but position remain at 13%.- Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
