Member Since: 04 Aug 2016
Location: firenze
Posts: 44
taillights Led
good morning, I have a 2005 disk 3 bought used and I have not working epb. I tried everything but I could not solve it. since the old owner has replaced the taillights with the LED ones should they affect the operation?
thank you
21st Feb 2018 7:57 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1822
EPB is only the parking brake and is operated by the electronics when you pull up the lever and off again when you press the lever. If its not working it may be a fuse. If it makes a noise then it may be that it needs adjusting. More details required.
21st Feb 2018 10:08 am
discospero
Member Since: 04 Aug 2016
Location: firenze
Posts: 44
thank you.
epb from error code with iidtool 1CA00 4B (FB).
I did overhaul the module changed the switch under the brake pedal and adjusted the shoes.nothing is changed on the display says "parking brake not working pull to insert" but nothing moves and the various procedures with iidtool and bending (?) do not work .lo switch has been checked and sends the right commands but epb does not move.
21st Feb 2018 4:25 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1822
Was the "emergency" EPB brake release pulled at some time
21st Feb 2018 6:19 pm
discospero
Member Since: 04 Aug 2016
Location: firenze
Posts: 44
I'm sorry I did not understand. What happened? What should I do to repair?
thank you
21st Feb 2018 6:48 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1822
It was a question "Was the "emergency" EPB brake release pulled at some time". There is a cable underneath the parking brake switch lever to release the EPB if it gets jammed and that is what I was referring to. May need a dealership to fix
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum