Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
Just tried extra low in standard height and still goes in extended mode, doesn’t rise but 4x4 screen states off road.
2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
7th Apr 2018 4:20 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Have you tried calibrating your suspension height?
7th Apr 2018 4:32 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Gilly1 wrote:
Just tried extra low in standard height and still goes in extended mode, doesn’t rise but 4x4 screen states off road.
Perfect
Now for exit from this state, set EL in neutral and touch the LR suspension control and you will see your car raise again in standard height
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
7th Apr 2018 4:35 pm
Gilly1
Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
Hi, I calibrated the easy lift, but no I wasn’t brave enough to do suspension with Iid tool, is calibration simple process? Only done ccf with gap tool.2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
7th Apr 2018 4:35 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Just for explain better, using -30 and LR access together we really go to the limit where the vehicle thinks it has an obstacle.
If the suspension calibration isn't perfect, you can have this behaviour.
Just for this reason I've developed the extra low program.
With this features EL can stop the exended mode and the user can load/unload luggage or people
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
7th Apr 2018 4:44 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Gilly1 wrote:
Hi, I calibrated the easy lift, but no I wasn’t brave enough to do suspension with Iid tool, is calibration simple process? Only done ccf with gap tool.
Yes, IIDtool has a guided procedure very cool for that 8)
If you will do it, after re-calibrate Easy Lift so can be acquire the new values
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
7th Apr 2018 4:46 pm
Gilly1
Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
Ok great, thankyou, so it is ok to shut down and leave car with extended height message on screen even tho it’s in extra low. Or can it not be left in extra low until return to car.2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
7th Apr 2018 4:51 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Gilly1 wrote:
Hi, I calibrated the easy lift, but no I wasn’t brave enough to do suspension with Iid tool, is calibration simple process? Only done ccf with gap tool.
Yes, very, very simple. You just need the tool and a tape measure, it takes about 10 mins.
7th Apr 2018 5:01 pm
Gilly1
Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
Just checked with tape measure. From center of center cap fronts 470 and rears 500. Give or take a mil from normal height.2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
7th Apr 2018 5:39 pm
TinTapper
Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
Easy Lift is so Easy!
Just returned from our Easter break in the Cambrian Mountains and have to say what a joy it was to have the Easy Lift module! I have previously adjusted the suspension with my IID Tool but this has its limitations. We had rivers to ford, large boulders to clear and luggage to unload from roof - all made easy with a touch of a button
And being able to drive 30mph + over some of the terrain without the LR system bing-bonging and dropping to standard height was great!!
Fitted my updated module today to allow the new EasyLift iOS app to control the suspension , works a treat, fabulous tool now .
I always drop the suspension to hitch trailers, then hit raise, shut the door and get the the back of the car just in time to hitch up, no need now, just stand there and control height from my phone
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum