irl32
Member Since: 27 Aug 2009
Location: Co Mayo
Posts: 66
  
|
Hi All.
Thanks to everyone for the help info and photos for the din 2 sterio.
One final question I want to fit the radio and Cruise control buttons to my 2006 discovery 3 steering wheel according to the powerful UK site they will work as the loom is already there.
Anyone do this with theres
|
 14th Feb 2017 9:18 pm |
|
|
irl32
Member Since: 27 Aug 2009
Location: Co Mayo
Posts: 66
|
Hi had anyone ever fitted the steering wheel control buttons to a discovery 3
|
| 15th Feb 2017 12:19 am |
|
|
Maxc
Member Since: 19 Nov 2014
Location: Southampton
Posts: 29
 
|
Andi, I changed the high end system in my D3 by simply bypassing the MOST bus. I lost the amp, but the new system had plenty of power so it wasn't a problem, and more than made up for with BT, nav, MP3, DAB, camera, etc. I bought a dead amp to remove the speaker output socket, which I terminated the new output extension leads with to patch into the original speaker wires below the driver's seat. It worked perfectly, though I have just removed it and refitted the original system with no problems (resale looming).
The unit I used was an Xtrons double DIN. You will have to trim some of the plastics behind the original stereo, but it has no negative effect. I also fitted a Garmin unit in place of the original nav screen.
|
| 15th Feb 2017 8:49 am |
|
|
irl32
Member Since: 27 Aug 2009
Location: Co Mayo
Posts: 66
|
| Steering wheel control installation update |
|
Hi go all 
Just a quick update to say thanks to every ones help and advice the installation of the steering wheel controls went well all worked when powered up and no alarms.
Cheers again to all
|
| 19th Feb 2017 1:45 pm |
|
|
